Windows 10: Windows ICD Deployement Fails - windeploy.exe, 0x80071501

This may be bit higher level than what this forum is for. I apologize if I shouldn't post here.

I'm cross-posting this here from: Windows ICD Deployement Fails

I'm needing help figuring this out.

As the title says, I'm using a customized provisioning package with ICD to deploy a WIM image (stock win10 vlk) with my scanstate created ppkg attached.
My whole process:

• Deploy win10 on VM, boot into Audit mode
• Make customizations and install software.
• Capture with scanstate. (Copied windows setup sources into root of amd64)
• Import ppkg and attach to stock WIM
• make customizations
• create clean install media
• plug into computer
• computer gets past the first screen, and proceeds to "installing windows"
• gets to 64%, reboots
• gets to 92%, reboots
• starts again at 64%, and reboots at 92%
• This repeats infinitely. (left it over night even)

Is there something I'm missing?
I'm making a 64bit win10 pro 1607 build.
ICD reports 0 invalid customizations. I tell scanstate to capture /apps and that's it
I pulled the HDD from the target system, so if there's some kind of error file I can look for. let me know... %windir%\logs\cbs is empty.
I'm pulling my hair out here. Any help is greatly appreciated, thank you for your time.
Found this under %wnidir%\Panther\UnattendGC\setuperr.log
Looks like this occurred over 475 times over night during the install.

:)

 

Windows anniversary error code 0x80071501

After many days of researching, looking for a fix for this problem, I have found nothing. I located a log in C:\$WINDOWS.~BT\Sources\Panther\UnattendGC\setupact.log Here is what it reads

[windeploy.exe] ------------------------------------------------

2017-02-18 09:46:46, Info [windeploy.exe] WinDeploy.exe launched with command-line []...

2017-02-18 09:46:46, Info [windeploy.exe] LogBootDeviceInfo:The firmware boot device ARC path is [multi(0)disk(0)rdisk(0)partition(1)] and NT path is [\Device\Harddisk0\Partition1].

2017-02-18 09:46:46, Info [windeploy.exe] LogBootDeviceInfo:The system boot device ARC path is [multi(0)disk(0)rdisk(0)partition(5)] and NT path is [\Device\Harddisk0\Partition5].

2017-02-18 09:46:46, Info [windeploy.exe] Waiting for essential OOBE services to start.

2017-02-18 09:46:46, Info [windeploy.exe] Essential OOBE services started successfully.

2017-02-18 09:46:46, Info [windeploy.exe] Windeploy: Sysprep mode is [0x0].

2017-02-18 09:46:46, Info [windeploy.exe] Windeploy: Executing PreSysprep commands

2017-02-18 09:46:46, Info [windeploy.exe] ExecuteCommandFromValue: Executing command line: C:\$WINDOWS.~BT\Sources\SetupPlatform.exe /presysprep

2017-02-18 09:46:52, Info [windeploy.exe] ExecuteCommandFromValue: Command line returned result: 0x00000000

2017-02-18 09:46:52, Info [windeploy.exe] Found generalization state [0x4], setup.exe completion flag [False] --> launching setup.exe.

2017-02-18 09:46:52, Info [windeploy.exe] Launching [C:\WINDOWS\system32\oobe\setup.exe]...

2017-02-18 09:46:54, Info [svchost.exe] Enter WinReIsWimBootEnabled

2017-02-18 09:46:54, Info [svchost.exe] Parameters: pszWinDir: NULL

2017-02-18 09:46:54, Info [svchost.exe] Exit WinReIsWimBootEnabled returns 0 with last error: 0x0

2017-02-18 09:48:03, Info [windeploy.exe] Process exited with exit code [0x0]

2017-02-18 09:48:03, Info [windeploy.exe] Found completion flag [True], reboot requested flag [True] --> rebooting computer before proceeding with deployment...

2017-02-18 09:48:03, Info [windeploy.exe] Windeploy: Executing PostSysprep commands

2017-02-18 09:48:03, Info [windeploy.exe] ExecuteCommandFromValue: Executing command line: C:\$WINDOWS.~BT\Sources\SetupPlatform.exe /postsysprep

2017-02-18 09:51:01, Info [windeploy.exe] ExecuteCommandFromValue: Command line returned result: 0x00000000

2017-02-18 09:51:01, Info [windeploy.exe] OrchestrateCanStartOOBE: Found a non-OOBE service Appinfo; restart required before OOBE launch

2017-02-18 09:51:01, Info [windeploy.exe] Reboot required after setup.exe and PostSysprep commands, before launching OOBE.

2017-02-18 09:51:01, Info [windeploy.exe] Making sure that SystemSetupInProgress is cleared.

2017-02-18 09:51:01, Info [windeploy.exe] An immediate reboot or shutdown was requested/required... rebooting / shutting down computer

2017-02-18 09:51:02, Info [windeploy.exe] Flushing registry to disk...

2017-02-18 09:51:02, Info [windeploy.exe] Flush took 0 ms.

2017-02-18 09:51:02, Info [windeploy.exe] WinDeploy.exe exiting with code [0x0]

2017-02-18 09:51:37, Info [windeploy.exe] ------------------------------------------------

2017-02-18 09:51:37, Info [windeploy.exe] WinDeploy.exe launched with command-line []...

2017-02-18 09:51:37, Info [windeploy.exe] LogBootDeviceInfo:The firmware boot device ARC path is [multi(0)disk(0)rdisk(0)partition(1)] and NT path is [\Device\Harddisk0\Partition1].

2017-02-18 09:51:37, Info [windeploy.exe] LogBootDeviceInfo:The system boot device ARC path is [multi(0)disk(0)rdisk(0)partition(5)] and NT path is [\Device\Harddisk0\Partition5].

2017-02-18 09:51:37, Info [windeploy.exe] Waiting for essential OOBE services to start.

2017-02-18 09:51:37, Info [windeploy.exe] Essential OOBE services started successfully.

2017-02-18 09:51:37, Info [windeploy.exe] Making sure that SystemSetupInProgress is cleared.

2017-02-18 09:51:37, Info [windeploy.exe] Windeploy: Executing PreOOBE commands

2017-02-18 09:51:37, Info [windeploy.exe] ExecuteCommandFromValue: Executing command line: C:\$WINDOWS.~BT\Sources\SetupPlatform.exe /preoobe

2017-02-18 09:51:40, Info [svchost.exe] Enter WinReIsWimBootEnabled

2017-02-18 09:51:40, Info [svchost.exe] Parameters: pszWinDir: NULL

2017-02-18 09:51:40, Info [svchost.exe] Exit WinReIsWimBootEnabled returns 0 with last error: 0x0

2017-02-18 10:09:49, Info [windeploy.exe] ExecuteCommandFromValue: Command line returned result: 0x80071501

2017-02-18 10:09:49, Error [windeploy.exe] Failure occured during online installation. Online installation cannot complete at this time.; hr = 0x80071501

2017-02-18 10:09:49, Info [windeploy.exe] Windeploy: Executing OnError commands

2017-02-18 10:09:49, Info [windeploy.exe] ExecuteCommandFromValue: Executing command line: C:\$WINDOWS.~BT\Sources\SetupPlatform.exe /onerror

2017-02-18 10:09:49, Info [windeploy.exe] ExecuteCommandFromValue: Command line returned result: 0x00000000

2017-02-18 10:09:49, Info [windeploy.exe] Flushing registry to disk...

2017-02-18 10:09:49, Info [windeploy.exe] Flush took 15 ms.

2017-02-18 10:09:49, Info [windeploy.exe] WinDeploy.exe exiting with code [0x80071501]

Some of the things I have tried areisabling my antivirus. Running DISM and sfc /scannow. I have more than 50 gb of storage left. I'm ready to give up at this point, as I have tried updating over 20 times, each trying a new fix, with no success. Please
help!

 

Windows 10 OOBE loop after sysprep

I ran into boot loop after sysprep Windows 10.

I've prepared a custom machine to deploy with WDS.

Sysprep has been run with /oobe/generalize options.

When I restart, windows 10 get into a reboot loop, and every time ask for system oobe wizard.

I found these on setuperr log file:

[msoobe.exe] Failed to set password and password hint with hr=0xD000006C

[msoobe.exe] Failed to create the default account with hr=0xD000006C

[msoobe.exe] TASK: End failed running task PrepareUserOOBE with hr=0xD000006C.

[msoobe.exe] Failed user OOBE prep task with hr=0xD000006C

[msoobe.exe] Failed to run OOBE Host with hr=0x80004005

[msoobe.exe] OOBE failed with hr=0x80004005

[windeploy.exe] Command [%windir%\system32\oobe\oobeldr.exe /system /quiet] failed with exit code [0x80004005]

[windeploy.exe] OnError commands failed. hr = 0x80070002

 

Just an update, I removed the provisioning package I captured with scanstate and deployed just the ICD configurations and it gets passed "Installing Windows" but now it doesn't actually boot into Windows, it just goes into an infinite boot loop.

 

I found the resolution myself, please see crosspost mentioned in first post.