Windows 10: Windows Media Installation not selecting the desired USB drive.

I am currently waiting on parts to build my first computer, and I am currently on a Mac. Because of this, I needed to use a friend's PC to create the Windows 10 boot drive for me.

I checked that he met all of the system requirements, as well as most of the general troubleshooting, but the installation software wouldn't give us an option to choose which drive to install Windows on to. We were able to select the "download to USB" option, but it still tries to install on to his "C drive" which is not USB. It then says that the C drive is full, thus stopping the installation process. The USB that we're using is 32gb, and was also reformatted on his PC.

The USB is also showing up as working on his computer, so I'm not sure why it's not letting us install to it.

:)

 

Installing windows off of a USB stick

Step By Step from vista:
From admin cmd prompt

1. diskpart
1a. list disk
2. select disk 1 (replace 1 with your usb drive)
3. clean
4. create partition primary
5. select partition 1 (replace 1 with your usb drive)
6. active
7. format fs=fat32
8. assign
9. exit

Copy Windows Vista's DVD ROM content to the Flash Drive

xcopy d:\*.* /s/e/f e:\ (d being your vista cd and e being your usb stick)

And that's it, boot off your usb disk

 

Windows Media Center Live TV Help

Hi

go here - Hauppauge | Page Not Found select "Windows Media Center install" tab

look at - Setting up your TV tuner in Windows 7 Media Center - select download (will open a pdf with screen by screen instructions)
"Download
Here is a screen by screen view of the setup of Windows Media Center. It was based on the WinTV-HVR-1600, but the setup with other WinTV-HVR products will be similar."

Follow the guide stage by stage

let the TPU community know at what "step" Media Center gets stuck at Example: step 1, step 2

nb: It may be to do with your zip code and or post code not being entered

In regard to your DVD Rom drive - go to -control panel/device manager/DVD/CD-ROM drives -make a note of the make and model number Example: Pioneer DVD-RW DVR-215D ATA Device - highlight the device you have installed -press right mouse button-select properties-details-property and select Install Date from the drop down list and let us know this.

atb (all the best)

Law-II

 

Installing Windows 7 via USB flash drive!

Its weird tho cause I have no problem with installing from disc. I did change it back to boot from HDD. I really dont want to uninstall all my components, kinds defeats the purpose of installing from usb. it would take longer to disconnect and reconnect after install then it would to just install from dvd.

Do you think its beacuse the drive was formated in ntfs, thats the only step I did different from the OP. Well that and the bootsect /nt60 command before coping files.

heres they way I went, probly have to try it fat32

launch diskpart.exe)
select disk 1 (or your USB drive number, use list disk to get it)
clean
create partition primary
select partition=1
active
format fs=ntfs
assign
exit

Now that the drive is boot aware, we have to initialize its boot sector with the Windows boot manager (BOOTMGR), using the Bootsect.exe utility located in the boot directory of the Vista installation DVD. We have to tell the utility that our target drive is NTFS formatted:

bootsect.exe /nt60 f: