Windows 10: windows occur 0×d000a002 error code while connecting gpu docks

I do believe thats some type of driver conflict or system failure,My device is the Msi Claw A1M,while connecting gpu docksThe GPD G1 with Rx 7600M Xt,ill meet 0×d000a002 with pin code failuredelete ngc file and reset Pin code do have work,but only at the gpu docks plug inif you put it off,error code occurs again.Yeah,i could set the pin code once again without gpu docksbut if you plug it in,0×d000a002 will just get in at that screen...Seems gpu change or outer usb connection do effect windows hello system,i wonder know could it be solved?

:)

 

I cannot connect to home Wi-Fi off the docking station but not on docking station.

1. I cannot connect to home Wi-Fi off the docking station but not on docking station.
2. When i'm on docking station system says i'm connected to home Wi-Fi, but when i browse says not connected.
3. Other devices connected to home Wi-Fi has no issue.
4. What steps can i take to resolve the issue other than updating Wi-Fi adapter driver?

 

when i rebuild bcd,run bcdedit /export c:\bcdbackup,An error occurred

an ERROR IS The storage export operation has failed and the system cannot find the specified FILE because when laptop startup,screen display Not connected or unable to access the required device Error code 0Xc000000e but，i run bcdedit /export d:\bcdbackup,The screen shows that the operation was successful I run these commands step by step 1.bootrec /fixmbr 2.bootrec /fixboot 3.bootsect /nt60 sys 4.bootrec /fixboot 5.bcdedit /export c:\bcdbackup 6.attrib c:\boot\bcd -h -r -s 7.ren c:\boot\bcd bcd.old 8.bootrec /rebuildbcd An error occurred in the fifth step i use diskpart and list volume Disk C is only 260M, Disk H is the system disk, Disk D is a removable disk so What command should I enter in the fifth step

 

HDD Docking

Hi Tonyo,



Thank you for writing to Microsoft Community forum.

• What is the make and model of the computer?
  
• What is the make and model of the docking station?
  

The computer docking connections located on the bottom of the computer vary between computer models. For the docking station to work properly, the docking posts, eject mechanisms, and electrical connections on the docking station must be compatible
with the connections on your computer model.



Meanwhile, if the docking station is compatible, you may update the device drivers for your docking station and check if it works.



Update device drivers for docking station:

• Open the PC manufacturer support Web site, search for the
  Docking Station Driver for your PC model.
  
• Install the driver suggested and check.
  

If the issue persists, update the BIOS and try connecting the Docking Station again.



Note:

Modifying BIOS/ complementary metal oxide semiconductor (CMOS) settings incorrectly can cause serious problems that may prevent your computer from booting properly. Microsoft cannot guarantee that any problems resulting from the
configuring of BIOS/CMOS settings can be solved. Modifications of the settings are at your own risk.





Regards,