Windows 10: Windows Proxy or Tunnel

Hello,I have one pc with internet connection and one with no internet connection. Both PCs connected in same LAN, so the PC can communicate each others. Now i just want to know it's possible PC-1 which not have access internet connected to the internet using PC-2? I found some application for make PC-2 as proxy server, but this only work for any browser on PC-1 since in the browser we can configure the proxy. With this condition all other non browser application still not able to reach to the internet. Anyone know what should i do to enable PC-1 access to the internet?

:)

 

Proxy tunnel issue in windows

Hi,

In most cases, malicious software can change your settings which result in this issue. For us to effectively assist you, kindly provide us the information we need below:

• Have you made any significant changes to your computer that could have triggered the issue?
• Are you using any VPN connections?
• Have you tried to fully scan your computer for any malware?

Meanwhile, we suggest checking the post of Vinodh_Kumar V from this
thread to know how you can turn off the proxy settings in Windows 10. It would also show you what step to take if the settings won't be retained.

Do get back to us with the results and if you have any other questions, don't hesitate to post back.

 

Win 7 services over proxy?

Hello guys, well my internet is a mess, I'm using a proxy just to browse faster..., Is there a way to tunnel windows services to utilize this proxy?

So far have discovered how to use it on windows update via winhttpautoproxysvc, but I don't know how to configure windows time service to tunnel thru it...

Hope somebody can help me... Thanks in advance

Also program I used to tunnel fire fox is Proxifier.

 

Missing Microsoft Teredo Tunneling Adapter from Legacy Hardware

Hello,

Please try these suggestions:

Method 1:

Step 1: Modify TCPIPv6 Parameters through Windows Registry

1. Press “Windows” + “R” keys to load the Run dialog box.Type “regedit” and press Enter.
2. Inside Windows Registry, navigate (from the left pane) and highlight this key.
3. HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\TCPIP6\Parameters
4. At the right pane, double-click to modify the DisabledComponents key.
5. Set the DisabledComponents Value data to 0 (Zero) and select OK.
6. Close Registry Editor.
7. Restart your computer.
8. Navigate to device management.
9. Check if the Teredo tunneling adapter exists and working in device manager. To do that:

• From the View menu choose Show hidden devices.
• If the device manager's screen doesn't show any errors (and is without an exclamation mark) next to MS Teredo Tunneling Adapter then your problem is solved and the Teredo tunneling should work without problems.

If you face a screen with a yellow exclamation mark next to Microsoft Teredo Tunneling adapter.

Step 2: Uninstall all Teredo Tunneling Adapters & Interfaces.

1. Right-Click and Uninstall the Teredo Tunneling Pseudo-Interface.
2. Uninstall also all Microsoft Teredo Tunneling Adapters (e.g. Microsoft Teredo Tunneling Adapter #2 or #3 or #4, etc.)
3. Re-install Microsoft Teredo Tunneling Adapter by following the steps from this tutorial: How to install Microsoft Teredo Tunneling Adapter
4. If after re-installing teredo tunneling, you still have problems then proceed to Step 3.

Step 3. Enable Teredo Client using NETSH command

1. Right click at Command Prompt and select Run as Administrator.
2. At command prompt window type the following commands in this order and press Enter after typing each one of them.

netsh

int teredo

set state disabled

int ipv6

set teredo client

3. Close command prompt.

4. Open Device manager.

5. Select View > Show Hidden Devices. The Teredo Tunneling Pseudo Interface reappears and should be working without problems now.

Method 2 (not work in Windows 10 Home):

Open Group Policy Editor by running gpedit.msc command. Under Computer Configuration in the tree view, expand Administrative Templates then click All Settings. Look for "Set Teredo State", then double-click that. You will then enable the
policy and set the state below to "Enterprise Client" from what it was before in the dropdown menu under "Select from the following states".

Hope this helps!

References:

1. https://answers.microsoft.com/en-us/windows/forum/windows_10-hardware/how-to-install-teredo-tunneling-pseudo-interface/62790531-c342-4c5b-b367-542784ae768f

2. Redirecting