Windows 10: Windows Recovery Boot Loop

I am having issue loading up windows. I am stuck on a screen that says Windows Recovery and it tells me that windows could not start up properly. I’ve tried the advanced options, like the command prompt, the restore option, and I was able to go into Windows safe mode. But whenever I try to restart my pc and load into normal windows i get stuck in the same loading screen. I do not want to resort to resetting my pc, i feel like there’s a way to fix this problem. Any advice would be helpful. Also i have a usb with windows os but i haven’t tried troubleshooting with it yet, still need to do some research on how to use that usb to fix my problem

submitted by /u/SosaWay
[link] [comments]

:)

 

windows recovery loop

Hi,

Please answer these question to assist you better.

Are you able to Windows recovery environment?

I suggest you to create a Windows 10 installation media and perform a Startup Repair on the device and check if it helps to resolve the issue.
This is an alternate way to boot the device and run recovery tools when something goes wrong with the Operating system.

Please follow the steps below to do Startup repair:

Steps:-

• • • • • 
          Insert the installation USB drive
          and boot Windows 10 from it.
          
          If you don't have one, you can Create an installation Media.
          
        • 
          In the ‘Windows setup’ page select the ‘language to install’, ‘Time and currency format’
          and the ‘keyboard or input method’ and click on ‘next’.
          
        • 
          Click on ‘Repair your computer’ and select ‘Troubleshoot’.
          
        • 
          Click on ‘Advanced options’ and select ‘Startup Repair’
          and select the operating system.
          

Do let us know if you are able to boot to desktop. Thank you.

 

Boot loop

Hi Terri,

This issue occurs when there are broken components on the boot configuration data of your system. To troubleshoot your boot loop issue, we suggest that you boot in
safe mode through the Windows
Recovery Environment option. To do this, follow these steps:

• Turn on your computer. When the Windows logo appears, unplug and replug the device. Perform these steps three times.
• On the fourth instance, turn on your device without unplugging it. The Windows Recovery Environment window will appear.
  
• On the Choose an option screen, click Troubleshoot.
• Click Advance options.
• Click Startup Settings.
• Click Restart.
• Once your computer restarts, you will see a list of options. Press the F4 key to start your computer in
  safe mode.
  

Once done, we suggest that you perform a system restore after booting in safe mode. System Restore will be able to revert your PC or laptop to their previous state, which can be used to repair and recover system malfunctions or issues. Restoring won’t affect
your personal files, but it will remove apps, drivers, and updates installed after the restore point was made. To do this, follow the steps below:

1. Right-click the Start button, and then select
Control Panel.

2. Search Control Panel for
Recovery.

3. Select Recovery > Open
System Restore > Next.

4. Choose the restore point related to the problematic
app, driver, or update, and then select
Next > Finish.

Feel free to post back if you need further assistance.

 

How does Windows boot to advanced recovery option e.g. command prompt?

- that gives me a 454 'Unexpected error' This tells me that the BCD is partially corrupted.

The commands: shutdown.exe /r /o /f /t 00
or: %SystemRoot%\System32\Cmd.exe /c reagentc /boottore&shutdown /r /f /t 00
should boot into Recovery if everything is configured correctly.
FYI, If Windows is configured correctly:

1. If Reagentc is disabled, you still can get into Recovery but with limited options.
2. If Reagentc is enabled, you'll get all options.
3. If you boot Windows using Recovery USB stick, You'll get into Recovery with couple of options missing.

Here's my suggestion if you want to try:
OPTION 1: Will save the trouble of re-install Windows.

1. Download the image of my first 3 partitions (450MB Recovery, 100 MB EFI partition, and 16MB unformatted primary)
   EFI_Boot-00-00.7z - Google Drive
2. Run Macrium and restore the image from step 1, overwriting your existing 1st three partitions, leaving C alone.
3. Delete the 490MB Recovery partition.
4. From Macrium, run fix boot problems.
5. Reboot. Open Admin command prompt then run Reagentc /info to make sure that it is enabled. If not, enable it.
   if failed to enable, reboot and try again.

OPTION 2: Assuming you've already had Windows backup with Macrium.

1. Wipe out the first 5 parttiions. (450MB, 100MB, 16MB, C Drive, 480MB)
2. Fresh install Windows 10
3. Restore C drive from backup image, run fix boot problems
4. repeat step 5 from OPTION 1 above.