Windows 10: Windows restricts my access to a disk with two partitions.

Hello Guys.I would like to find a solution to a problem I’ve got and I can't find any suitable information in the web how to solve it, reason to write about it here. The problem:Windows restricts my access to a disk with two partitions.Description of the problem:I have a windows 11 install on my work PC disk 0. The disk 0 is split into two partitions C:Windows 11; Drojects. All works fine when use PC in the mentioned configuration. The problem occurs when I boot from an external SSD drive it appears as disk1 - contents my personal installation of Window 10. At this point windows 1

:)

 

W7 Hard drive partition issue

to get rid of that 100 meg windows partition that setup creates for you on a new install on a blank hdd:

- press shift+f10 when on the partition management screen in setup <-- this opens a command prompt
- diskpart <-- start the windows command line partition management tool
- list disk <--- list the installed hdds in this computer for the next step
- select disk 0 <- might have to replace 0 with the number of the correct disk
- clean <-- this will erase all data on the disk you selected one step up- dont use the wrong disk!
- create partition primary <- creates a primary partition taking up all space on the drive, adjust the command if necessary
- exit, exit to exit diskpart and the command prompt
- click refresh in partition manager and select your newly created partition and install to that

 

Disk management console view is not up-to-date

i dont know how to fix your disk management, but i can fix your partition problems...




open up Command Prompt with admin rights. (Right click, run as admin)


enter in
DISKPART
list disk

then find the Disk number for your Raid array... lets call it number 7 ( you can tell what disk is what by the total size)
type in

Select Disk 7
List Partition (will give you a list of all the partitions..)
Select Partition 1 (im assuming you only have 1 partition on Disk 7) repeat this step if you have more partitions.
ASSIGN


that should get the array up and running ready to use.


EDITED.

any problems, post back ^^


Still EDITING *Stick Out Tongue

side question, have you tried restarting the PC?

 

Sudden automatic appearance of disk partition on Windows 10

Hi,

Please let us know, if you have made any changes prior to this issue.

I suggest you to remove the partition and check.

To delete an existing partition from Windows 10:

• Follow the instructions from step 1 to 5 from the above section.
• From the right pane of the Disk Management section, right-click the volume (partition) that you want to delete.
• From the context menu that appears, click Delete Volume.

Hope this information helps.

Regards,

Guru Kiran