Windows 10: Windows shuts down almost every night with this error: The computer has rebooted from a...

The computer has rebooted from a bugcheck. The bugcheck was: 0x00000133 0x0000000000000000, 0x0000000000000501, 0x0000000000000500, 0xfffff80717efb320. A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 2b470fdc-96ad-489e-baf9-afa6a12dfa95

:)

 

Computer is rebooting itself.

Yeah, automatic updates is turned off, and event viewer says something about Windows not shutting down correctly. There's no BSOD, or there would be a window on the desktop saying there was a BSOD and giving me the error code and such. It seems to just reboot itself. I've never seen it do it while I was using it, though.

 

shutting down computer at night

Hi,

Thank you for visiting Microsoft Community.

I can imagine the inconvenience you are experiencing and will certainly help you in the right direction to fix the issue. However, I would appreciate if you could answer a few questions to narrow down the issue in order to provide
you with better assistance.

• Are you getting any error message/code while turning on your computer?
• Is it still stuck at starting screen or you are able to boot the computer to the desktop?
• Have you installed Windows 10 recently?

If you are able to boot the computer and able to reach desktop screen then try to follow the steps provided below and see if it helps you to fix the issue.

Method 1

Try to run Power Troubleshooter which is built troubleshooter and you may follow the steps mentioned below to run it.

1. Press the
Windows key and X at the same time.

2. Now click on
Control panel.

3. In the
search box of Control Panel type Troubleshooter, and select
troubleshooting among the list.

4. Under
System and Security, click Improve power usage.

5. Now try to run the
troubleshooter and check if it helps.

Note: If you're prompted for an administrator password or confirmation, type the password or provide confirmation.

Method 2

If issue persists I would suggest you to Reset and restore the power plans to default.

1. Press
Windows key and X at the same time.

2. Choose
Command Prompt (Admin) from the context menu.

3. In the command prompt, type
powercfg –restoredefaultschemes and hit Enter.

4. Exit
command prompt.

Note: This would reset the power plan settings to default. Any customized power plans would be removed.

Method 3:

If that does not help, delete the power plan and create a new power plan and check.

Please follow these steps to change the power plans:

a) Press Windows
Key +X key together.

b) Select Control Panel. Select
Power Option.

c) From the left hand side panel select Create
a Power Plan.

You can refer to the following link.

Power plans: Frequently asked questions

Windows help & learning

Note: The article is for Windows 8/8.1 but steps holds good for Windows 10 too.

Do get back to us with all the information required and result of proposed suggestion. We will be happy to assist you further.

Regards,

 

DPC_WATCHDOG_VIOLATION ” and computer is on a reboot loop error in windows 10 please help me

Hi Chetan,

Thank you for posting in Microsoft Community, we appreciate your interest in Windows 10.

I understand your concern about accessing your laptop after upgrade to Windows 10 with error DPC_WATCHDOG_VIOLATION, we will help you with this issue.

Please be informed us with the following,

• Were able to see any error code along with the error message?
• Were you able to login in to the desktop?
• Also, have you updated all the drivers after upgrading to Windows 10?

If you are unable to log-in to the desktop, I suggest you to log-in to safe mode and try the below steps.

Method 1: I suggest you to boot the computer in Safe mode and shut down the computer and check if the issue persists.

Step 1: Start computer in safe mode.

• 
  Type Settings in the search box on the desktop, select
  Settings.
  
• 
  Here select Change pc settings and then
  General.
  
• 
  Scroll down to Advanced startup, click
  Restart now.
  
• 
  Click on Troubleshoot, Advanced options, and Startup Settings.
  
• 
  Click Restart, select Safe mode and then press
  Enter.
  

If the issue still persists, follow the below steps:

Step 2: Check if the NVIDIA graphics card is detected in device manager. If it is detected, update it's drivers and check if that helps.

• 
  Right click on the Start button from the desktop and select
  Device Manager.
  
• 
  In the list of Hardware categories, double-click the category your device is in and then double-tap the device you want. For example, to see your video card, click Display adapters, and then double-click the video
  card name.
  
• 
  Click the Driver tab, click
  Update Driver, and then follow the instructions. You might be asked for an admin password or to confirm your choice.
  

Step 3: If that does not fix the issue, please reinstall the display adapter drivers.

• 
  Right click on the Start button from the desktop and select
  Device Manager.
  
• 
  Locate and expand Display adapter.
  
• 
  Right-click on the Display adapter that is listed and click “Uninstall”.
  

Restart the computer and download, install the latest drivers from the NVIDIA website.

http://www.nvidia.com/Download/index.aspx

Hope this information helps. Reply to the post with updated status of the issue to assist you further.