Windows 10: Windows Sound settings cannot be opened/used while Headphones are connected

Hello,I've run into a problem when using headphones Sony wh-1000xm3. When the headphones are connected wirelessly via bluetooth I cannot open Windows Sound settings Windows 10, or, if I had them opened prior, they just freeze and won't allow me to click on anything, until I've disconnected the headphones.I've tried restarting the sound services, removing the headphones then pairing them again and other "fixes" recommended that i could find online but so far nothing has worked. Headphones do have a built in mic, so both input and output could in theory be set to them, but that may be caus

:)

 

No sound through headphones

Hello Sander,

Thank you for keeping us posted.

I certainly understand your concern and will try my best to help you.

I really appreciate all your efforts in trying to fix the issue.

In order to understand the issue more clearly, I would request you to provide me with the following information.

• 
  What is the make and model of the headphones?
  
• 
  Have you tried connecting the headphones to another jack or another computer and checked if they are working?
  

Make sure your headphones aren't plugged into the line out (headphone) jack of your sound card or computer (unless you want to be listening with headphones rather than speakers). When you plug in headphones, most computers
automatically cut the sound to the speakers. Ensure the headphone is fully and firmly inserted into the correct jack. Plug in the headphone and see if the same shows up in Device Manager.

I would suggest you to try the following methods and check if it helps.

Method 1:

Run inbuilt Hardware and Device troubleshooter and check if it works. Follow the steps given below.

Note:
If your computer is having problems with a recently installed device or other hardware, try using the Hardware and Devices troubleshooter to fix the problem. It checks for common issues and makes sure that any new device or
hardware attached to your computer was installed correctly.

• 
  Press Windows Key +R, type
  Control Panel.
  
• 
  Type troubleshooting
  in the search bar, click on troubleshooting.
  
• 
  Click on Hardware and Sound, click on
  Hardware and Devices.
  
• 
  Follow the steps from the wizard to run the troubleshooter.
  

If issue persists, follow method 2.

Method 2:

Check with the volume settings. Please follow the steps given below and check if it helps.

• 
  Right click on the speaker icon in taskbar and select volume control options.
  
• 
  Put a check mark on "All devices currently playing sound".
  
• 
  Make sure you have "The default communication device unchecked".
  
• 
  Place a check mark on both speakers and headphones. Click Apply and OK.
  

If issue persists, follow method 3.

Method 3:

This happens when you have the speakers set to default. We need to set the headphones as default. Please follow the steps given below and check if it helps.

• 
  Perform the task mentioned below to set speakers as default.
  
• 
  Go to Start and click on control Panel.
  
• 
  Click in Sound, then a new window will open up.
  
• 
  In the new windows click on the tab "Playback" and right click in the window and click on Show Disabled devices.
  
• 
  Now check if the headphone is listed there and right click on it and choose enable.
  
• 
  Highlight that headphone and click on "Set as Default".
  

Also try to install latest chipset drivers in the system and check if it helps.

The above steps holds good for Windows 10 as well.

Also, I would suggest you to refer to the suggestions provided by
“Preethu” replied on April 22, 2015 in the following Microsoft Community link and check if that helps.

http://answers.microsoft.com/en-us/...ndows-10/7c172f44-52bf-4263-8b59-789e8f6cb3ae

I hope this information is helpful.

Please do let us know if you need any further assistance, we will be glad to assist you.

Thank you.

Jayant

 

no sound in headphones

Hi Mary,

If your headphones stops working in Windows devices, you can try solutions below to fix the problem. The issue can be caused by incorrect sound settings, faulty audio drivers, etc. We suggest that you follow below simple instructions to troubleshoot the
problem.

• Check if the sound is muted. If it is muted, the headphone won’t have sound.
• Check the connection. Try unplugging the headphone and firmly plug it back in.
• Check the port. If you are using a USB headphone, try a different USB port.
• Try the headphone on another computer. Use your headphone on another computer. If it doesn’t work on that computer, the headphone might be broken. In that case, you need to replace it with a new one.

We're just here if you have further questions.

Regards.

 

Headphone Connection

Hello,

Thank you for your interest in Windows 10!

I understand that the headphones are not working when you connect then through the jack on your Windows 10 operating system. I will certainly help you with the query. I would appreciate if you could help us with more information

• 
  Have you checked plugging the headphone to a different jack on the same computer?
  
• 
  Have you checked if any other sound device work fine when plugged to the problematic jack?
  

This issue might be occurring due to incompatible drivers or broken jack. There might be a possibility that the headphone is not compatible with windows 10 operating system. Hence I would suggest you to follow the below mentioned
steps and check if that helps.

Method 1:
Hardware and devices troubleshooter

The built-in hardware and devices troubleshooter can automatically detect and fix most of the incorrect settings and errors that could cause issues with hardware. I would suggest you to run this troubleshooter to check if there is any issue with
the display adapter. Refer top these steps:

• Open Control Panel
• Click on Troubleshooting and select the view all option on the left pane.
• Click on Hardware and devices troubleshooter and follow the prompts.

Try method 2, if the issue persist

Method 2: If the Hardware and Devices troubleshooter do not fix
the issue then I would suggest you to uninstall the drivers and reboot the computer to get the updated drivers installed for the headphone. Please follow below mentioned steps:

• Open Control Panel
• Click on Device Manager and select the audio input and output drivers
• Right click on driver that appears after plugging the headphone and click on uninstall
• After uninstalling, unplug the headphone and restart the computer
• Plugging the headphone again and the computer will detect the updates drivers automatically.
  

Now check if the headphones work on the computer or not.

Hope this information is helpful. Please write back to us if you need any further assistance, we'll be glad to assist you.