Windows 10: Windows successfully loaded the device driver for this hardware but cannot find the...

If you’re encountering the error message Windows successfully loaded the device driver for this […]

This article Windows successfully loaded the device driver for this hardware but cannot find the hardware device (Code 41) first appeared on TheWindowsClub.com.

read more...

 

unstable hardware drivers following Win 10-511 update

Hi,

Thank you for posting your query in Microsoft Community. Apologize for the inconvenience caused and will assist you.

I suggest you to run the Hardware and Devices troubleshooter by following the steps below:

• Click on the Start button, and type “Troubleshooting” on the search bar.
• Click on “hardware and devices”.
• A pop-up will appear, click on the “Next” button and follow the on-screen promts for troubleshooting.
  

Also, update the driver for Keyboard by following the steps below:

• Press Windows key + X and click on
  Device manager.
• Expand Keyboards from the list.
• Right click on the driver and select
  update driver software.

Hope the information is helpful. Feel free to
write to us for any other assistance with Windows, we’ll be glad to assist you.

 

Driver error in device manager: "Windows cannot load the device for this hardware --PLDSDVD1-RWDH-16ABSATA" on Windows 10.

Hi,

The issue might occur if that particular driver is corrupted or incompatible.

I suggest you to check for pending updates.

Windows Update: FAQ

https://support.microsoft.com/en-us/help/12373/windows-update-faq

You may also run the Hardware and Devices
troubleshooter.

Hardware and Devices troubleshooter checks for common problems and makes sure that any new device or hardware connected to your PC is installed correctly.

• Type troubleshooting in the search bar.
• Select Troubleshooting.
• Select View all on the top left corner.
• Click on Hardware and Devices.
• Follow the on-screen instructions to run the troubleshooter.

Let us know the status of the issue in regards with drivers. Your reply is important to assist you further.

Regards,

Guru Kiran

 

missing camcorder imaging device "drivers"

It looks like the manufacturer of the device you're trying to install didn't release drivers to Windows 10.

As a workaround, we suggest that you contact your manufacturer and ask for the legacy drivers of the device for Windows 7. Once you have the file of the drivers, right-click on it and choose
Extract. Once done, add it as a legacy driver. To do so, see the steps below:

• Go to Device Manager > Action > Add legacy hardware. Follow the virtual steps to add a hardware.
• Once done, it will show you the common hardware types; then, choose IEEE 1394 host controllers.
• After choosing IEEE 1394 host controllers, it will show you the page to select the manufacturer and model of your hardware.
• To choose for the legacy driver you've extracted, click Have Disk >
  Browse. Now it will show you the window to locate the file.

Let us know what happens after doing the suggestions above.