Windows 10: windows ten update KB4343909

when tryind to install it gets to 25 percent then says pending download KB41000347 and restarts

`

:)

 

VPN issue with KB4343909

Hi Dan,

Since the issue started after installing the latest build, we don't have much information yet as to what might be causing your VPN connection to stop working. However, we would like to troubleshoot the issue to determine what triggers it and how it can be
solved.

By the way, have you tried troubleshooting the VPN connection issue while the
KB4343909 was still installed on your computer? If so, what were the steps you've performed? Did you get other error messages aside from the "Trying to connect" message?

If it's okay with you, I would like to suggest to reinstall the KB4343909. Once reinstall, you may run the
Network Troubleshooter and perform the Network Reset to help us to further diagnose in case the issue persists. Below are the steps:

Network Troubleshooter

1. In the Cortana search, type in
   Network Troubleshooter, then select Identify and repair network problems from the list of results.
2. Follow the on-screen instructions.

Network Reset

1. Navigate to the Windows key > Settings > Network & Internet > Status > Network reset.
2. On the Network reset screen, select Reset now.
3. Click Yes to confirm.

If the above steps doesn't help, then I encourage you to submit this issue using the Feedback Hub so our software engineers will be able to look into the problem and conduct further investigation regarding the matter. Please follow these steps to submit
a feedback.

1. In Cortana search, search for Feedback Hub, then launch it.
2. In the left panel, navigate to Feedback, then Add new feedback.
3. Select the Problem, and share any relevant information. Choose also the appropriate category and subcategory regarding the issue.
4. If possible, reproduce the problem(s) after clicking Begin monitoring (or Start capture) near the end of the form, and Stop monitoring when done.
5. Click Submit once the form is complete.
6. Click Continue using Feedback Hub.
7. Click My Feedback at the top, then find the item you submitted.
8. Open the item that you have submitted, then click Share.
9. Click Copy link, then paste the link here in your response.

I'm looking forward to your response.

Regards.

 

Windows Updated(16299.309).KB4088776 Restart is required to complete.


Hi dalchina. Good news, I followed your suggestion and reinstalled the update and now it appears as "installed correctly" *Biggrin Maybe it was not necessary to run the Windows Update Troubleshooter or maybe if necessary. But using it I do not think it could have worsened something. The installation was very fast, unlike the first time it showed step 1 and step 2 completed.

Thanks for the suggestions and for the time to respond Best regards.


And thanks for the tip of that program, I'll have it on my list.

 

Windows Updates failed to instal

I'm not sure how differant XP media center Edition is but you could clear the history \ cache if these folders are there.

Step 1 Register DLL files.

=================

By trying this step, we can check if the update engines are working properly.



1. Close all instances of Internet Explorer.

2. Click Start and Run, type "Regsvr32 atl.dll" (without quotes) in the Open box and click OK.



Note: There is a space between regsvr32 and atl.dll



3. Similarly, one by one, register the files listed below:



Regsvr32 msxml3.dll

Regsvr32 wuapi.dll

Regsvr32 wuaueng.dll

Regsvr32 wuaueng1.dll

Regsvr32 wups2.dll

Regsvr32 wucltui.dll

Regsvr32 wups.dll

Regsvr32 wuweb.dll

Regsvr32 qmgr.dll

Regsvr32 qmgrprxy.dll

Regsvr32 jscript.dll



Note: If you encounter errors while registering any of these files then skip that file and continue with the next one.



If the issue persists, let's move on to the steps below to verify Windows Update services and temporary folders.



Step 2 Verify the relevant Windows Update services.

=========================================

1. Click Start->Run, type "services.msc" (without quotation marks) in the open box and click OK.

2. Double click the service "Automatic Updates".

3. Click on the Log On tab, please ensure the option "Local System account" is selected and the option "Allow service to interact with desktop" is unchecked.

4. Check if this service has been enabled on the listed Hardware Profile. If not, please click the Enable button to enable it.

5. Click on the tab "General "; make sure the "Startup Type" is "Automatic" or "Manual". Then please click the button "Stop" under "Service Status" to stop the service.

6. Then please click the button "Start" under "Service Status" to start the service.

7. Please repeat the above steps with the other services:



Background Intelligent Transfer Service

Event Log

Remote Procedure Call (RPC)



Note: Event log service is enabled on all of the hardware profiles; this service does not have an option to enable or disable on certain hardware profile.



If it still does not help, let's proceed to step 3.



Step 3 Reload the Update temporary folders.

===================================

One possible cause is that the temporary folder for Windows Update is containing corrupted files. Let's erase all the files there to get the system clean.



1. Click Start, Run, type: cmd and press Enter. Please run the following command in the opened window.



Net stop WuAuServ



2. Click Start, Run, type: %windir% and press Enter.

3. In the opened folder, rename the folder SoftwareDistribution to Sdold.

4. Click Start, Run, type: cmd and press Enter. Please run the following command in the opened window.



Net start WuAuServ



Please test the Windows Update website and let me know the result. If the issue persists, to clarify the issue and provide more accurate troubleshooting steps, please assist me in collecting the following information.