Windows 10: Windows UEFI İnstall Problem

Video Link :





İ Can't İnstall Windows From USB.


Where's the Blue Windows İnstall Screen ?


- USB is Original Windows USB.

- PC System is New ( completely )

- This First Windows İnstall.

:)

 

Trouble installing windows 7 on RAID in UEFI

As the title says, I'm trying to install Windows on a RAID array in uefi on my Maximus V Formula. When using legacy ROM I can install just fine but I go into CSM and change settings to UEFI only, I can build the array in the UEFI Raid driver (IRST tab in "BIOS") but the array does not show up in the boot menu and when I try to install windows (boot from UEFI DVD drive), The drive does not show up in the Windows install. The next thing I tried was to enable UEFI and legacy oprom in CSM, boot from UEFI DVD drive and install to the RAID array (probably detected by legacy oprom) and it will install. After first reboot, Windows Boot manager will show up as an option in the BIOS boot menu so I set that as first boot device and reboot. I will get to the starting windows screen and then BSOD (too quick to get codes) The last thing I tried was Changing to legacy mode and installing windows to a different drive. once installed, I initialized the Raid array as GPT and rebooted, changed csm back to UEFI only but they RAID array still doesn't show in the boot device list so I repeated the earlier process hoping that It might work because I had initialized as GPT but it still BSODs on starting windows screen. Any help or suggestions would be greatly appreciated

 

Trouble installing windows 7 on RAID in UEFI

I think you were on track with your first try. Windows installer probably needs the RAID driver in order to detect it on install.

 

Windows 10 1709 System Restore problems...


That seems to be an attempt at Option 2 in the tutorial, which requires you to
a. Boot to a command prompt (Did you?)
b. You then seem to be mixing steps 3,4 and 5, thus your command is incorrect.

I suggest Option 1 is easier.

If you still have problems, please repost listing each specific step and saying which option from the tutorial you are using. Thanks.