Windows 10: Windows update after October 1st

Okay, so I updated Windows on my laptop on the 1st and everything worked, but then at about the 4th it updated again and now it says "Your PC did not start correctly" I need help fixing this.

:)

 

Intel Gives Core i3 and Core i5 Dual-Core Processors K0 Stepping Update

Intel is giving some existing 32 nm "Clarkdale" based Core i3 and Core i5 processors an update. The processors will transition to the new K0 stepping from the existing C2 stepping. The parts that will be made on the K0 silicon are Core i3 models 530 (new sSPEC: SLBX7), 540 (new sSPEC: SLBTD) and Core i5 models 650 (new sSPEC: SLBTJ), 660/661 (SLBTK/SLBTB), 670 (SLBTL). Newer and upcoming models such as the i3-550, i3-560, i5-665K, and i5-680 are already being built on the K0 stepping die. Motherboards will require a BIOS update to support the new K0 stepping processors.

The K0 stepping change includes the following highlights:

• New S-spec and MM numbers for the converting products
• Extended CPUID will change from 0x00020652 to 0x00020655
• Host RevID will change from 0x12 to 0x18
• K0 stepping package is pin compatible with C2 stepping package
• Adds Processor Context ID (PCID) support

The revised older SKUs that are built on K0 stepping will be market-available by October 16.

 

Windows Updated(16299.309).KB4088776 Restart is required to complete.


Hi dalchina. Good news, I followed your suggestion and reinstalled the update and now it appears as "installed correctly" *Biggrin Maybe it was not necessary to run the Windows Update Troubleshooter or maybe if necessary. But using it I do not think it could have worsened something. The installation was very fast, unlike the first time it showed step 1 and step 2 completed.

Thanks for the suggestions and for the time to respond Best regards.


And thanks for the tip of that program, I'll have it on my list.

 

Intel Readies P55 Chipset B3 Stepping Update

Intel's is readying a hardware update for its P55 Express chipset, currently the only core-logic for the company's brand new socket LGA-1156 processor platform. The new B3 stepping of the P55 PCH will bring with it a little more than new MM number and S-spec numbers. A list of changes is as follows:

• New MM number and S-spec numbers for the converted products;
• Firmware and minor BIOS updates are required with the conversion;
• Processor MRC/microcode update required to enable future processors;
• Recommended storage driver upgrade from Intel MSM 8.9 to Intel RST 9.5.

Although it is listed that the MRC update enables 'future processors', Intel, in a statement issued to X-bit labs assured that the current B2 stepping of the chipset (found on current socket LGA-1156 motherboards) does not leave out support for any of Intel's new LGA-1156 processors that are slated for release in the very near future. The dual-core "Clarkale" 32 nm processor will be supported by both B2 and B3 steppings of the chipset.

P55 B3 stepping is pin-identical to P55 B2, and hence motherboard vendors will not have to come up with new designs. Sampling of the new stepping began as early as on October 02, 2009, and it is scheduled for shipment to manufacturers by the 7th of December, 2009. P55 is the performance core-logic for the LGA-1156 platform. It supports Core i5 and Core i7 "Lynnfield" processors with discrete graphics.

Source: X-bit labs