Windows 10: Windows update causing a drive failure

I was in the middle of an update and around the 27% mark everything stopped and the following message appeared on screen: “Reboot and select a proper boot drive or insert boot media in selected boot device and press a key”. I reseated the sata cables for my drive and made sure the made sure the correct boot drive was chosen on the bios but I didn’t have any luck with that. I have an identical copy of the drive stored away on and was able to get it to boot up. Is there any way to fix the original drive? Or would my only option to be to reformat it and copy the contents of the older identical drive?

For context: The failed drive was having problems with disk management and was constantly at 100% utilization. By chance I found out that it hadn’t been updated since April of 2018 and was updating to see if it would fix the problem.

submitted by /u/HeavenlySchnoz
[link] [comments]

:)

 

Windows 10 1909 Causes Secondary Hard Drive to not be Recognized

Installing the Windows 10 1909 Update causes my secondary hard drive to not be recognized.

Steps to confirm issue:

• Secondary drive not visible in Windows Explorer
• Secondary drive not visible in device manager
• Secondary drive not visible in disk manager

Steps to replicate issue:

• Installing 1909 update

Steps to resolve issue:

• Uninstall 1909 update

Since updates can only be delayed for so long, an actual fix would be appreciated.

 

Windows 8 failure configuring updates and reverting

No, the license only applies to the Windows 8 OEM copy the original owner purchased with laptop, it doesn't magically transform into Windows 8.1 Retail one.

OK, so here's the commonly recommended steps that should help you with your problem.

Before you begin, I would recommend you to download both of these files and save them on your USB drive in order to use it later as the only source of third-party packages:

• http://ftp.hp.com/pub/softpaq/sp67001-67500/sp67259.exe
• http://www2.ati.com/drivers/amd-catalyst-14.4-64bit-win8.1-win8-win7-whql-aug.exe

1. The first step would be to recover the original Windows installation using your hard drive partition (the thing that you've done before, I believe). Follow the steps described here (http://h10010.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03544793#N258) and see if you missed anything. By the end of this operation, make so that your HP product is not connected to any sort of network.

2. Configure your HP device to boot in "clean" mode as described here (http://support.microsoft.com/kb/929135). Restart once.

3. Run the first file you've downloaded (http://ftp.hp.com/pub/softpaq/sp67001-67500/sp67259.exe) from your just-recovered Windows copy and follow the steps required.

4. Run the AMD package (http://www2.ati.com/drivers/amd-catalyst-14.4-64bit-win8.1-win8-win7-whql-aug.exe). Choose the "Advanced" installation option in order to be able to opt-out the "AMD/Raprt App" and "HydraVision" packages.

5. Establish an Internet connection. Run "Windows Store" tile from your Start screen, and select "Windows 8.1" package.

6. Once you're done with your migration from Windows 8 to Windows 8.1, you can install all the critical updates offered by Windows Update, which would be driver software, then Windows 8.1 Update package (KB2919442 > KB2919355 > KB2932046 > KB2959977 > KB2937592 > KB2938439 > KB2934018), "August" Update (KB2993651 > KB2975719 > KB2993100 > KB2979582 > KB2990532 > KB2995004) and .NET Framework 4.5.2 (http://www.microsoft.com/en-us/download/details.aspx?id=42642).

 

Windows 8 failure configuring updates and reverting

I agree 8 is awful! It's not for me though... I replaced a broken screen in a Win 8 laptop that was given to me and I am going to give it for free to someone that can't afford one so they can do homework at home. Yes I took it from 8 to 8.1 back on 10/09/2014. This is what I posted there...

"Great post! I found a similar one. I would like to point out that you may want to edit your OP...

1. Step 1 should read to disable AUTOMATIC updates, not disable manual updates.

2. KB2871398 should really read KB2871389

I would like to say that KB2917499 may also be needed as it was in my case. I also had to run the Windows Update Troubleshooter after installing those 2 updates. After these steps I was able to begin my 8.1 download from the Microsoft store. I don't know if it made a difference or not, but I also went into the Bios and disabled "Secure Boot."

It was a helpful post. Thanks!