Windows 10: Windows update fails with 0xC1900101 - 0x40017 boot error

Discus and support Windows update fails with 0xC1900101 - 0x40017 boot error in Windows 10 Installation and Upgrade to solve the problem; Running Windows 10 version 1809. When Windows tries to update me to version 1909 or 2004 I get the error code: 0xC1900101 - 0x40017 boot error... Discussion in 'Windows 10 Installation and Upgrade' started by Chuck_74, Jul 23, 2020.

  1. CHUCK_74
    Chuck_74 Win User

    Windows update fails with 0xC1900101 - 0x40017 boot error


    Running Windows 10 version 1809. When Windows tries to update me to version 1909 or 2004 I get the error code:


    0xC1900101 - 0x40017 boot error


    Believe this is tied to my AMD RAID 10 hardware based disk array, since error occurs in the boot process. Haven't been able to find any new drivers for the array. RAID array works fine with 1809.


    To get any additional windows updates, support for my RAID hardware is required.


    Motherboard: ASROCK AB350 Gaming - ITX/AC

    CPU: AMD Ryzen 5 2400G
    BIOS: American Megatrends version P5.70

    Memory: G.Skill 16GB, 2x8GB dual channel DDR4 - 2400Mhz

    Boot Drive: Samsung SSD 960 EVO, 256 GB nVME

    :)
     
    Chuck_74, Jul 23, 2020
    #1
  2. DEEPIKA GOWDA
    Deepika Gowda Win User

    Windows 10 Update Error 0xC1900101 - 0x40017

    Hi,

    Thank you for posting in Microsoft Community, we appreciate your interest in Windows 10.

    I understand your concern with the error: 0xC1900101 - 0x40017 while upgrading to Windows 10, we will help you with this issue.

    I would like to inform that this error may occur for one of the following reasons:

    • Antivirus software conflicts
    • Hardware conflicts
    • Corrupted/ faulty driver conflicts

    I suggest you to refer to the below article by Andre Da Costa, try the troubleshooting steps mentioned under:
    0xC1900101 - 0x40017 error code and check if it helps.

    How to: Troubleshoot common Setup and Stop Errors during Windows 10 Installation

    Hope it helps. Reply to the post with an updated status of this issue for further assistance.
     
    Deepika Gowda, Aug 3, 2020
    #2
  3. DIEWOE
    Diewoe Win User
    0xC1900101-0x40017 The Installation failed in the SECOND_BOOT phase


    Error with windows update, trying to install the November update of windows 10

    0xC1900101-0x40017
    The Installation failed in the SECOND_BOOT phase with an error during BOOT operation.

    I have done the DISM stuff the SFC stuff and even did a full CLEAN install of windows 10 losing all my programs and that's how i got the error i listed above. I downloaded the patch using the Windows Media tool as the windows update wont seem to download it and say it will try again later. It always seems to fail on one of the restarts.

    Any Idea how to get the November update installed? Oh and now some of my programs are saying im missing MSVCP100.dll and trying to go to the download page at Microsoft just says try again later.
     
    Diewoe, Aug 3, 2020
    #3
  4. FRANZ EIGENSTETTER
    Franz Eigenstetter Win User

    Windows update fails with 0xC1900101 - 0x40017 boot error

    Windows update error 0xC1900101-0x40017

    I have done all the suggestions EG clean boot and stopping

    mi server. Spend many hours also uninstalling the old programs. No success. Now

    I received the following message.

    0xC1900101-0x40017

    Installation failed in the second Boot phase with an error during Boot operation.

    I desided to stay with windows 7 it worked very well.

    Regards Frank E

    Original title: Mr
     
    Franz Eigenstetter, Aug 3, 2020
    #4
Thema:

Windows update fails with 0xC1900101 - 0x40017 boot error

Loading...

  1. Windows update fails with 0xC1900101 - 0x40017 boot error - Similar Threads - update fails 0xC1900101

  2. 24H2 Upgrade Error 0xC1900101-0x40017. The install fails on SECOND BOOT.

    in Windows 10 Gaming
    24H2 Upgrade Error 0xC1900101-0x40017. The install fails on SECOND BOOT.: Split from this thread. Ramesh,Please accept my apologies in advance. I have never understood how to generate a question that elicits a response in one of these microsoft support forums.I also have a Windows 11 24H2 upgrade which fails to complete each time, despite all of...

  3. 24H2 Upgrade Error 0xC1900101-0x40017. The install fails on SECOND BOOT.

    in Windows 10 Software and Apps
    24H2 Upgrade Error 0xC1900101-0x40017. The install fails on SECOND BOOT.: Split from this thread. Ramesh,Please accept my apologies in advance. I have never understood how to generate a question that elicits a response in one of these microsoft support forums.I also have a Windows 11 24H2 upgrade which fails to complete each time, despite all of...

  4. Windows Update error 0xC1900101 - 0x40017

    in Windows 10 Installation and Upgrade
    Windows Update error 0xC1900101 - 0x40017: I tried to use MediaCreationTool20H2.exe and it didn't resolve my Windows issue. During the process of restarting my computer to update Windows 10, the second boot phase shows a text saying "Undoing changes made to your computer", which basically happens every method I used...

  5. Update to Windows Insider Preview 20236 failing with error 0xC1900101-0x40017

    in Windows 10 Installation and Upgrade
    Update to Windows Insider Preview 20236 failing with error 0xC1900101-0x40017: I've tried to update several times my windows installation to Insiders Preview 20236. However, installation rolls back after first reboot, with the following error code from SetupDiag Error: SetupDiag reports rollback failure found. Last Phase = Post First Boot Last...

  6. Windows 10 Update 2004 - Error 0xC1900101 0x40017 The installation failed in the...

    in Windows 10 Installation and Upgrade
    Windows 10 Update 2004 - Error 0xC1900101 0x40017 The installation failed in the...: Hey folks. I've been trying to update my windows 10 pro machine from 1909 to the 2004 feature version. Windows automatically attempted to do this several times already and it always fails. After this, I decided to try using a usb installation media to try and update...

  7. Update to Windows 10 2004 fails, error 0xC1900101-0x40017

    in Windows 10 Installation and Upgrade
    Update to Windows 10 2004 fails, error 0xC1900101-0x40017: Hello, on my desktop computer Intel Z170 chipset, integrated graphics, the update to Windows 10 2004 keeps failing, probably in the second boot phase. The update was offered in Windows Update no manual installation. I removed all unnecessary hardware and updated drivers,...

  8. error code 0xC1900101 - 0x40017

    in Windows 10 Installation and Upgrade
    error code 0xC1900101 - 0x40017: I am trying to update my windows 7 to windows 10. It all started because I got the new call of duty game : Warzone and when the download finished it was required that the PC needs to have Direct x 12. So the only option was to get the new Windows 10. I downloaded it from the...

  9. 0xC1900101-0x40017 error updating from 1803 to 1809

    in Windows 10 Installation and Upgrade
    0xC1900101-0x40017 error updating from 1803 to 1809: MSI Notebook GE70 0NC. 2018-10-17 09:32:32, Error CSI 00000001 (F) STATUS_OBJECT_NAME_NOT_FOUND #38# from Windows::Rtl::SystemImplementation::DirectRegistryProvider::SysQueryValueKey(flags = 0, key = b78 ('\REGISTRY\MACHINE\SYSTEM\Setup'), vn = [l:7...

  10. windows 10 fail install 0xC1900101 - 0x40017

    in Windows 10 Installation and Upgrade
    windows 10 fail install 0xC1900101 - 0x40017: Today I tried to upgrade from win 8.1 to win10 on a week old Acer E17 laptop, I had loaded office 16, elements13 and AVG prior to deciding to do the upgrade. However on upgrading I get the error above, with the comment install fail during second_boot. Googling the...