Windows 10: Windows will not boot with d and/or e drive plugged in but if I unplug them from the...

Windows will not boot with d and/or e drive plugged in but if I unplug them from the motherboard then plug them back in when windows gets to the login screen then they will work fine. I am using atlas 10 22h2 which is a modified version of windows that can minimise cpu/ram usage. System is i7 4790 8GB ddr3 @ 1600mhz & a 6700xt on a gigabyte h81m board.

:)

 

Installing windows off of a USB stick

Step By Step from vista:
From admin cmd prompt

1. diskpart
1a. list disk
2. select disk 1 (replace 1 with your usb drive)
3. clean
4. create partition primary
5. select partition 1 (replace 1 with your usb drive)
6. active
7. format fs=fat32
8. assign
9. exit

Copy Windows Vista's DVD ROM content to the Flash Drive

xcopy d:\*.* /s/e/f e:\ (d being your vista cd and e being your usb stick)

And that's it, boot off your usb disk

 

Windows 7 booting off wrong drive?!?!?

Please move if this is in the wrong place.

I have two hard drives, a 1.5TB drive, and a 160GB drive. Windows is installed on the 1.5TB drive, as are all my files and programs. The 160GB drive has a bunch of old files, and apparently the bootmgr and boot folder. Nothing else is on the 160GB drive, other than media files etc.

If I remove the 160GB drive from the machine, windows refuses to boot, plug it back in, it works fine. The setup with two hard drives I have now is temporary, as the 160GB drive will go into another machine.

My question is, can someone give me a step by step on how to make windows force to boot off the 1.5TB drive, ignoring the 160GB drive in the boot process completely?
I don't know how to do this in Windows 7, on XP I would just run the /fixmbr command and its related ones.

Any help would be appreciated.

Note: I would really really rather not have to wipe and reinstall, I know it can be done without one as I've had this issue with XP before.

 

D drive

Hi,

Based on the details you have provided us, it appears that there might be some corrupted contents on the said partition. We can also consider that this is caused by a virus.

For us to check if a certain virus is hiding your files, kindly follow the steps below:

• Type Command prompt in the search bar.
• Type-in the following command:
  
  attrib -h -r -s /s /d D:\*.*
• Press Enter to execute the command.

If you think that there is nothing important stored in it, then we suggest that you reformat your D drive so that you can use the free space for important files.

You can follow the steps below to start with the process:

• Click on the File Explorer.
• Select This PC.
• Right-click on your D drive, then click on Format.
• Follow the on-screen process to finish formatting the partition.

Let us know how it goes so that we can further assist you.