Windows 10: Windows won't boot

Hi,


I recently purchased a new SSD and wanted to copy all of my files over to it from an existing HDD. The files cloned successfully using a third-party program. I shut down the computer and changed the boot order to the new SSD and I keep receiving an error that says No Bootable Device Please insert bootable media.


I have an ASUS motherboard and have changed the boot priority, unplugged the old HDD so it's not connected to the motherboard and still see this error. I then used a recovery Windows USB created on a different computer to boot and try to fix boot issues. When I try to write the bootcode to the correct partition it says access denied in the CMD Prompt using diskpart and some of the suggestions online bootrec /fixboot etc.


So, I gave up on that wiped the SSD and just fresh installed Windows using the USB. The SSD now has the fresh Windows install and works fine with a brand new fresh Windows... I then unplugged the SSD and replugged in the HDD so I could access my old files to port them over manually and now I receive the same error on the old HDD and Windows will not boot on the old HDD. With just the old HDD plugged in and set in the correct boot order I just see the error No Bootable Device please insert bootable media.


I'm at a complete loss at what to do I have tried a lot of different solutions.


Does anyone know how to fix this problem?

:)

 

Skype won´t wok in 17063

Skype Won´t work... games won´t work...

Making backup and re-format...

Maybe I Install a Windows 7 again, At least, all of my games run smoothly ...Sadness!!

*Banghead

 

Sabertooth 990fx won't boot to windows logo, it shuts down

to boot and enter bios and load windows, any todays PSU (with the correct plugs) will work, AFAIK

to enter BIOS only low wattage is used.
Then, during boot, the HDD and a bit later the videocard card start to demand juice, then the other devices and periphericals... so the total demand during boot up is incrementing step by step, that's why a failure halfway could indicate a PSU problem....

 

My pc won´t boot Windows 10 from USB/DVD

So I wanted to change from my Windows 10 x32 bits to 64x. I downloaded the Mediacreationtool and used it in both a USB and a DVD. Tried used the usb, the disk and both at the same time but they won´t boot.

I have a P7H55-M motherboard, the BIOS is updated and configured to boot first DVD, second usb and third SATA.

So if someone could help me it´d be great.