Windows 10: 当我试着在windows10中开启snmp的时候，我发现我找不到他

windows10专业版版本1909，控制面板中启用或关闭Windows功能里面也找不到snmp的安装选项，这让人很头疼。是否新版的操作系统已剔除此功能，希望有人能帮我解答一下。

:)

 

SNMP help

The issue with polling from WAN is that the router will not know what to do with the incoming connection requesting the SNMP traps. Sure you could port forward the SNMP port from WAN to LAN but the network monitoring is probably IP based and on a private subnet (IS 192.168.1.x/24) and still at the point the router would not know what to send it too once it has entered. You could do a rule to port forward each IP individually with a virtual WAN port that translates to an IP and SNMP port on the LAN side but would take time if you have MANY devices. I would just suggest doing a IPSEC vpn tunnel between the off site router to the router on site.

 

SNMP help

I had tried previously to run the monitor internally on a server and just poll the devices directly over VPN which worked but the polling internval or traffic from the devices must have been too high because its caused outages network and site wide. Maybe I will look into it again and see if I misconfigured something previously.

Thanks.

 

unable to access printer from XP shared machine

Hi,

Thank you for the update.

I suggest you to disable the SNMP option from Windows features and check if it helps.

To do that please follow the steps below:

• Type Windows feature in the search bar.
• Open Turn windows feature On or Off.
• Locate SNMP. Simple Network Management Protocol and Turn it off.

Please let us know to in future if you need further help.

Thank you.