Windows 10: Wired Network connection.

Back in the early 2000’s, I ran ethernet to multiple computers in my house. For a while I was able to use it to do a lot of file and printer sharing in the home network, but for the last few years it’s been a lot more iffy, and I’m currently looking at my new Windows 11 system with network discovery and file and print sharing both enabled, and despite that I can’t see or be seen by any other computer on the system. Not the ones still running Windows 10, or the other Windows 11 system.I'll note that none of the systems have ever had any issues accessing the internetAny advice on what I can do

:)

 

Help needed with simple wired network

Step one- Connect all PC's to router, and then the router to the modem. PC's go to router by the ports labeled "1-4" on the back of the router. WAN port goes to router. Power up all network equipment, and then systems.
Step two- Power on the computer connected to port one. Go into router settings at 192.168.0.1 and configure internet, dyndns, firewall, etc.
Step three- Go to "network set up wizard" in windows. (Network places- network set up wizard). The rest is self explanatory.
Step four- right click on each drive and printer you want to share, and then configure sharing preferences. Should be easy enough.
Step five- right click my computer, and the select "map network drive". Using the network address for each piece of hardware you shared, assign network drive letters.

Congratulations, you have a fully operational network. Happy Gaming! *Toast :toast:

 

Help needed with simple wired network

Perfecto!!!! *Smile

 

Unable to print to a network printer when connected to both wireless and wired networks

Hi Eileen,

• As far as i'm aware nothing has changed
• i have only tried to send test pages to the network printer so im assuming so yes
• wireless printer works fine when connected to both networks. However the wifi doesn't connect auto when an Ethernet connection is established this has to be manually connected.

I have tried the following:

• updated the print driver
• changed the network port it was plugged into
• ran windows updates
• configured with a static
• changed the wifi and Ethernet priority

I will run through the trouble shoot steps as suggest and come back to you.

FYI - he has a number of extenders dotted around, a collegue mentioned it could be a subnet issue?

thanks, Ben