Windows 10: Working touch-screen as secondary monitors on Windows 11

I have recently a second touch-screen monitor to use with my PC. It works perfectly except for the fact that touch does not work if it is set up as the second display. For Windows 10 I have to use "Table PC Settings" to assign touch input to secondary monitor. On Windows 11 I cannot find any tools like this. So the touch input is always triggering primary monitor.

:)

 

touch monitor not working

1. monitor:
   • Panasonic touch-screen monitor.(interactive white board)
   • connected with pc running on windows 7 proffessional.
   • upon turning on it says "touch screen detected" and "touch control transferred to local device."
2. PROBLEM :
   • Touch screen is not present under Device manager>HID.
   • Device manager > monitor shows "generic non-pnp monitor".
   • Pen-and touch settings are missing from control panel.
   • even though monitor supports the touch screen windows says "pen or touch input is not available for this display. "

 

Wake monitor on touch screen

Winver 21H1 OS Build 19043.1348

I have a Windows 10 machine and just purchased a 15inch monitor touch screen. It works great just plug and play. However, to conserve energy and life of the monitor I have the computer set to turn off monitor after 10 minutes of inactivity. Problem is touching the screen will not wake it up. And there is no power button on the screen itself. And I plan to have no keyboard or mouse hooked to this machine. There is however a remote which I can use to power on the monitor but touching the screen to wake it up would be real convenient. The computer stays on 24/7 as it serves as a server.

I've done some research about how to wake it up with touch and that seems to be a new feature that is available in Windows 11. However, what about Windows 10? I've also read about adding a reg code to disable modern standby but it states it is used for AoAC systems which I am not familiar with. Here is the link.

Any suggestions would be greatly appreciated. Thanks!

 

Multi USB touch monitor wrong cursor

I have two USB touch monitor (As Primary HDMI and Secondary VGA);
As every time reboot, then secondary monitor touch will be wrongly go through to at the same to primary monitor display,

The main problem is after reset the tablet PC touch from control panel is work but reboot again likely loose the setting. Does any have other suggestion for solve the problem?

Thanks