Windows 10: Would it be possible to change my usb stick to fat32 using my phone or would it have to be...

Is it possible to change a flash drive using my android phone please * Moved from Community Center

:)

 

Installing windows off of a USB stick

Step By Step from vista:
From admin cmd prompt

1. diskpart
1a. list disk
2. select disk 1 (replace 1 with your usb drive)
3. clean
4. create partition primary
5. select partition 1 (replace 1 with your usb drive)
6. active
7. format fs=fat32
8. assign
9. exit

Copy Windows Vista's DVD ROM content to the Flash Drive

xcopy d:\*.* /s/e/f e:\ (d being your vista cd and e being your usb stick)

And that's it, boot off your usb disk

 

Correct Format for USB Stick | FAT32? | NTFS? | Some Other Format?

So, that appears to indicate that Macrium doesn't care about the format... as long as the file system can be "seen" by your system.

I'd suggest exFAT...
http://www.pcworld.com/article/3109559/hardware/why-your-usb-drives-file-format-matters-fat32-vs-exfat-vs-ntfs.html

 

Correct Format for USB Stick | FAT32? | NTFS? | Some Other Format?

Yes, I know that newly purchased USB sticks are FAT32. However, that's not what I asked.

I asked about a 74 GB System Image (not Recovery Media) created on a non-bootable USB stick (not a removable USB drive) as a .MRIMG file.

If the System Image is created by Macrium, and Macrium will be used to perform the restore (not a Recovery), what format does the USB stick need to be in... FAT32 or NTFS?

Assume Macrium DOES NOT format the USB stick. Given this, what format does the USB stick need to be in... FAT32 or NTFS?

Thanks