Windows 10: "Your PC/device needs to be repaired" - Can't turn on my PC

Whenever I try to turn on my computer it shows an error saying "Your PC/device needs to be repaired". At sunday I was using normally my computer, didn't install nothing, didn't change any settings, anything, I turned it off and went to sleep. When I turned it on by the monday this problem appeared. I've already watched a lot of videos teaching how to solve it but they don't help, these videos say to plug a bootable USB pen-drive with a windows installation media in and reinstall the windows, I've already tried this but my pc won't boot the USB, I've already changed the boot priority at the BIO

:)

 

Recovery - Your PC/Device needs to be repaired

Hi,

To resolve this issue, we suggest that you repair your PC using an installation USB or disc. If you do not have a Windows 10 installation USB or disc, you can download and create one from the

Microsoft software download website. To create an installation media and use it to repair your computer, follow the steps below:

• On a working PC, go to the
  Microsoft software download website.
• Download the media creation tool and then run it.
• Select Create installation media for another PC.
• Choose a language, edition, and architecture (64-bit or 32-bit).
• Follow the steps to create installation media, and then select Finish.
• Connect the installation media you created to your nonfunctional PC, and then turn it on.
• On the initial setup screen, enter your language and other preferences, and then select
  Next. If you're not seeing the setup screen, your PC might not be set up to boot from a drive. Check your PC manufacturer's website for info on how to change your PC's boot order, and then try again.
• Select Repair your computer. You will then be able to perform Startup Repair to repair your PC.
  
• On the Choose an option screen, select Troubleshoot >
  Advanced options > Startup Repair.
• You can also use the installation media to start your PC in safe mode or reset your PC.

Let us know how it goes for us to assist you further.

 

PC Build Steps

Ok just because I like steps i am going to create some steps. Please give me the stamp of approval/disapproval

• Install system in case
  • Remember to connect SSD and optical to same SATA ports on motherboard
• Turn on PC
• setup HDD
• run blend test in prime95 for 30-60 min
  • run realtemp at the same time

• While in Prime95 test
  • if CPU goes above 70c in RealTemp, I have a leaky CPU
  • if my system locks up or blue screens, there is an instability in the system somewhere
  • if my system does not lock up or blue screen, my CPU is not damaged and I am in the clear!

What do you guys think??

 

Recovery. Your pc or device needs to be repaired

Hi,

To address your concern, we suggest that you run the Windows Startup repair. To do that, follow these steps:

• Using you installation media, access the Windows recovery environment.
• Select Troubleshoot
• Choose Advanced option
• Choose Automatic Repair or Startup Repair.
• Once done, your system will restart.

Let us know if you need further assistance.