Windows 10: BSOD Win 10 copy files do HDD (Raid 1)
Discus and support BSOD Win 10 copy files do HDD (Raid 1) in Windows 10 BSOD Crashes and Debugging to solve the problem; Hi ZigZag3143 I'm having a problem with a new machine I'm setting up. This machine has 4 disks, which are operating in Raid 1. 2 Disk M.2 500Gb with... Discussion in 'Windows 10 BSOD Crashes and Debugging' started by FranciscoJMFrade, Nov 20, 2019.
Thema:
BSOD Win 10 copy files do HDD (Raid 1)
Loading...
-
BSOD Win 10 copy files do HDD (Raid 1) - Similar Threads - BSOD copy files
-
Raid 1 if second HDD was unplugged with it copy over once plugged back in?
in Windows 10 Ask InsiderRaid 1 if second HDD was unplugged with it copy over once plugged back in?: I have two HDDs in software RAID 1. I am copying 3 older HDDs onto the new one. When I was putting the second HDD in ( I have to swap the 3 HDDs around) I may have unplugged my second HDD in the RAID 1 but I am not sure. If I did now that I had plugged it back in, will... -
BSOD when copying files from external HDD to external HDD
in Windows 10 BSOD Crashes and DebuggingBSOD when copying files from external HDD to external HDD: Long story short, I've purchased a 5TB WD Mypassport USB C HDD to replace my 4tb wd my passport and I'm usding syncback to copy over about 2.8TB of backups and what not Twice now I've had it crash while running. I've come back to it and found it has restarted. found the... -
Windows 10 / Raid 1: "Optimize" shows HDD, NOT installed SSD's
in Windows 10 CustomizationWindows 10 / Raid 1: "Optimize" shows HDD, NOT installed SSD's: I HAVE NOT RECEIVED A COMPLETE ANSWER TO THIS QUESTION: PLEASE, HELP! In my new Windows 10 desktop computer, RAID 1, Two SSD's, I see Optimize shows "Hard Disk Drive", NOT "SSD", and I want to be sure defragmentation is not applied to these drives, instead of the proper... -
Windows 10, RAID 1, Optimize Shows HDD, not SSD
in Windows 10 CustomizationWindows 10, RAID 1, Optimize Shows HDD, not SSD: In my new Windows 10 desktop computer, RAID 1, Two SSD's, I see Optimize shows "Hard Disk Drive", NOT "SSD", and I want to be sure defragmentation is not applied to these drives, instead of the proper TRIM utility. What need I do? I found a reply for this regarding Windows... -
Windows reinstall & Win RAID 1
in Windows 10 Ask InsiderWindows reinstall & Win RAID 1: Hello. First time poster to this sub. I have an SSD for a boot drive, and my data locations are on a Windows RAID 1 (made the array during the initial install about 18 months ago). This week I am planning on upgrading to a larger SSD on which I will reinstall Windows. My... -
Fresh Win 10 Pro install and RAID 1
in Windows 10 Installation and UpgradeFresh Win 10 Pro install and RAID 1: I have an MSI 990FXA-GB80 MoBo. I just installed two Crucial 500gig SSD's into my case and SATA3 to my MoBo. My previous SSD, a Mushkin, got corrupted and died and I lost my recent data. SO, I decided I would do RAID 1 this time with the two Crucial SSD's. I have 16 gig of... -
Raid 1 problems
in Windows 10 Drivers and HardwareRaid 1 problems: I have two 3TB disks on Raid 1 setup. I also have a folders with DVD movies there. The problem is that my media players crashes after the "Universal" intro when i try to play them. If i test the discs separately it works fine. But on Raid 1, it crashes. Weird thing is that... -
Raid 1 problems
in Windows 10 SupportRaid 1 problems: I have two 3TB disks on Raid 1 setup. I also have a folders with DVD movies there. The problem is that my media players crashes after the "Universal" intro when i try to play them. If i test the discs separately it works fine. But on Raid 1, it crashes. Weird thing is that... -
Windows 10 raid 1 using windows raid
in Windows 10 Drivers and HardwareWindows 10 raid 1 using windows raid: Hello everyone. I'm new to the forum. I've added a hard drive to my system to enable raid 1 via windows 10 Pro (not hardware raid). my main drive has 4 partitions which were set up when I installed windows 8.1. I have since upgraded to 10 pro. I assume these partitions...