Windows 10: Re My Computer Updating. Why is it that it take so long to Finnish updating?

Hi Customer Service

Your Urgent Help Is Needed.


Windows 10 start updating on Monday January 6th. 2020 and I stop it on Friday January 10th. after 4 days. But it was not completed. On Tuesday Morning at 7.30 Am, January 14th. I just got up from my Computer, and when I came back to my computer, I notice that it already, started updating, so I allowed it.


It is now Friday, January 17th. 2020, 4 days after, and it is still updating, not Finnish.


Can you say why it is taking so long, I need to use my computer, but I would love to have the updating done first?


I am

Don

January 17th 2020

:)

 

Intel Readies P55 Chipset B3 Stepping Update

Intel's is readying a hardware update for its P55 Express chipset, currently the only core-logic for the company's brand new socket LGA-1156 processor platform. The new B3 stepping of the P55 PCH will bring with it a little more than new MM number and S-spec numbers. A list of changes is as follows:

• New MM number and S-spec numbers for the converted products;
• Firmware and minor BIOS updates are required with the conversion;
• Processor MRC/microcode update required to enable future processors;
• Recommended storage driver upgrade from Intel MSM 8.9 to Intel RST 9.5.

Although it is listed that the MRC update enables 'future processors', Intel, in a statement issued to X-bit labs assured that the current B2 stepping of the chipset (found on current socket LGA-1156 motherboards) does not leave out support for any of Intel's new LGA-1156 processors that are slated for release in the very near future. The dual-core "Clarkale" 32 nm processor will be supported by both B2 and B3 steppings of the chipset.

P55 B3 stepping is pin-identical to P55 B2, and hence motherboard vendors will not have to come up with new designs. Sampling of the new stepping began as early as on October 02, 2009, and it is scheduled for shipment to manufacturers by the 7th of December, 2009. P55 is the performance core-logic for the LGA-1156 platform. It supports Core i5 and Core i7 "Lynnfield" processors with discrete graphics.

Source: X-bit labs

 

Intel E5200 Gets Updated, R0 Stepping Coming Up

Intel's Pentium Dual-Core E5200 processor is getting on course for a specifications update. The chip will feature in a new, improved Wolfdale-2M core, spec'd out as the R0 stepping, from its current M0 stepping. The new stepping is intended to add new instructions, power-management features, and bring about changes in the chip-package. A short list of known changes is as follows:

• CPUID changed from 10677 to 1067A
• Power State Indicator (PSI) support with Intel 4 series chipsets
• New instructions - XSAVE and XRSTOR
• New S-spec and MM numbers
• New halide-free chip package

Due to the changed CPUID, users may require BIOS updates to detect the CPU. According to the company, E5200 R0 should be out by April 13.

Source: TechConnect Magazine

 

Alienware Area 51 m15x BIOS Update Released

If you were among the group of people experiencing overheating issues with your Alienware Area 51 m15x laptop, then there are some good news for you. A new BIOS update, version X29b P3A30 is now available. The update allegedly allows VGA fans to increase up to 5400 rpm and thus better cool the GPU. To obtain the new BIOS, you'll need to email the m15x support line (L: Area51_m15x@alienware.com). In reply you should receive a link to the BIOS .zip archive. Once you download the small file, Alienware recommends to follow the steps described in the Read full story marker.



Open Nero Ultra Edition, click Backup, and then click “Burn Image to Disc.” Next, select the file “m15x_x29b.iso from the unzipped folder.

• Plug your AC adapter in
• Disconnect all third-party peripherals
• Don’t turn off the computer or restart it during the update
• Don’t eject your DVD/Blu-ray drive during the update.

Steps:

• Open BIOS by tapping F12 during boot
• Set BIOS to boot from your CD-ROM drive first
• Save and exit
• Upon reboot, the BIOS flash update will proceed
• Click “Yes” through the prompts
• Restart

Source: LAPTOP Magazine