Windows 10: Scanner Mouse not working

I have a zcan wireless scanner mouse. It works great in Window 7 but I just got a new computer with windows 10 and when I downloaded the software an error code appears and will not run...I see many other people have had the same problem...I need this device to work I use it constantly...any idea when we could expect a fix?

:)

 

Epson 1200 scanner now working! Very pleased.


Worked perfectly,

• Installed 2400 series driver (when it asked what model I had I also picked, 1270 and 4180 since these had the Slide scanner interface I thought it might add a few extra drivers)
• Restarted PC
• Needed to use Device manager 'Updated driver'
• Assign 2400 driver. (See attached image)
• Be sure scanner is powered on so it appears in device manager.

Tested the Slide scanner attachment, I used PRO mode and it was discovered.
I had to use the plastic blackout slide holder (for masking the slide) to find the slide though.



Hope this helps others, Thanks again for the step by step!

 

Fingerprint Scanner Not Working

Hello Gary,



Thank you for posting on Microsoft Community.

To resolve this issue try the following steps:

• 
  Have you updated the driver for the Finger Print scanner? If not, check on the manufacturer’s website (HP).
  
• 
  Check if installing the latest driver of the fingerprint scanner allows you to login using a Microsoft Account?
  

This issue might occur due to driver incompatibility since upgrading to Windows 10.



If you have the raw executable file of the corresponding driver for the validity sensor, I would suggest you to install the downloaded driver file in compatible mode with Windows 7 or 8. Refer to the following steps to do so.

• 
  Right click on the driver, and click on Properties.
  
• 
  Go to the Compatibility tab.
  
• 
  Check the box for Run this program in compatibility mode for:
  
• 
  Select Windows 7 in the list of Operating systems.
  
• 
  Click OK.
  
• 
  Double-click the driver file to install the driver and follow the onscreen instructions.
  
• 
  Reboot your computer.
  

Hope the above steps help.



Thank you.

 

mouse is not working right


unfortunately there isn't a lot to a usb mouse. what i would suggest is checking the power management settings on it.

Right-click the start menu and choose device manager
Expand Universal Serial Bus Controllers at the very bottom
Double-click on each HUB you have listed, click Power Management Tab at the top, and UNCHECK "Allow this computer to turn off this device to save power"
You may have HUBs called Generic and Root Hub. Perform the step above on All of them.

If you continue to have the issue, i would imagine your mouse is malfunctioning. Perhaps try another mouse just to be sure. This will help you determine if it is in fact the mouse of computer causing the issue.

Good Luck!!