Windows 10: Windows 10 update failure A6210.sys RESTART

I have a optiplex 7010 Dell and I am trying to upgrade it from Windows 7 to windows 10 i have bought and downloaded the update but when i go to restart and update the computer i get this code.


”Your PC ran into a problem and needs to restart. We’re just collecting some error info, and then you can restart.

Stop Code : PAGE FAULT IN NONPAGED AREA

What failed: A6210.sys

:)

 

Windows 8 failure configuring updates and reverting

I agree 8 is awful! It's not for me though... I replaced a broken screen in a Win 8 laptop that was given to me and I am going to give it for free to someone that can't afford one so they can do homework at home. Yes I took it from 8 to 8.1 back on 10/09/2014. This is what I posted there...

"Great post! I found a similar one. I would like to point out that you may want to edit your OP...

1. Step 1 should read to disable AUTOMATIC updates, not disable manual updates.

2. KB2871398 should really read KB2871389

I would like to say that KB2917499 may also be needed as it was in my case. I also had to run the Windows Update Troubleshooter after installing those 2 updates. After these steps I was able to begin my 8.1 download from the Microsoft store. I don't know if it made a difference or not, but I also went into the Bios and disabled "Secure Boot."

It was a helpful post. Thanks!

 

Windows Updated(16299.309).KB4088776 Restart is required to complete.


Hi dalchina. Good news, I followed your suggestion and reinstalled the update and now it appears as "installed correctly" *Biggrin Maybe it was not necessary to run the Windows Update Troubleshooter or maybe if necessary. But using it I do not think it could have worsened something. The installation was very fast, unlike the first time it showed step 1 and step 2 completed.

Thanks for the suggestions and for the time to respond Best regards.


And thanks for the tip of that program, I'll have it on my list.

 

Netgear A6210 causing BSOD (kernel security check failure)

Hi,

Thank you for posting your query on Microsoft Community.

It is possible that the Netgear A6210 adapter is not compatible with Windows 10. However, I suggest you to uninstall and re-install the driver and check if the issue persists.
If Windows 10 drivers aren't available, then we suggest you to download the Windows 7/8 drivers to install them in the compatibility mode. Refer to the following article for help to do the same:

How to: Install and Update drivers in Windows 10

Hope this information was helpful and do let us know if you need further assistance. We will be glad to assist.