Windows 10: Issues while updating to Windows 10 1903 on Microsoft Surface

I have a Microsoft Surface 64Gig laptop.

Update 1903 is trying to load but there is not enough space.

I have a 125 Gig chip installed as the D drive and a USB drive 2 TB as an E: drive.

How can I use either of the two extra drives to update the Surface

Also - over 30GB of space is used by the WIndows folder - I need to reduce this to a manageable amount

Thank you


***Original title: Microsoft Surface 64 GB will not update to 1903***

:)

 

New install Windows 10 (issue solved)

It's good that you're not experiencing any issues. Unfortunately many folks are, a quick Google search will show the same info im offering the OP.

Heres a couple examples:

Here

Here

It's basically what I mentioned above, small issues here and there ,but nothing to end your day.. for the most part.

I know it's anecdotal, but for my experience 95% of the time it's perfectly fine. The issues I've run into wouldn't be enough for me to roll back , but they would be enough (had I not installed it yet) ,to avoid it for another couple weeks which is why I'm suggesting it to the OP

Windows 10 Fall Creators Update problems and complaints

• Installation problems with the Fall Creators Update
• Microsoft Edge problems with the Fall Creators Update
• Drivers problems with the Fall Creators Update
• Experience problems with the Fall Creators Update

keep in mind, as of recently, the FCU is installed on 5% of devices roughly.....

 

Problem updating Windows Surface Pro 4 with Windows 10 feature updates

Hi,

I have manage to install image for Microsoft Surface Pro 4 by going to https://support.microsoft.com/en-us/...erecoveryimage and download a recovery image for Microsoft Surface Pro 4.

What I did to reset your Surface from a USB recovery drive was:
Step 1: Make sure your Surface is turned off and plugged in (hold down the power
button for 30 seconds).
Step 2: Insert the USB recovery drive into the USB port on your Surface.
Step 3: Press and hold the volume-down button while you press and release the
power button on your Surface.
Step 4: When the Surface logo appears, release the volume button.
Step 5: When prompted, select the language and keyboard layout you want.
Step 6: Select Troubleshoot > Reset your PC.
If prompted for a recovery key, select Skip this drive at the bottom of the
screen.
Step 7: Select the target operating system you wish to reset. This
refers to the current operating system installed on your Surface.
Step 8: Select Yes, repartition the drives, and on the next page, select Next.
Step 9: Choose Just remove my files.
Step 10: Select Reset.
Surface restarts and the Surface logo displays while the reset process continues
(this can take a while).

This always fails and I have to do the below which continues installation.
Windows 10 Installation Media:

1. Insert the Media (DVD/USB) in your PC and restart.
2. Boot from the media.
3. Select Repair Your Computer.

Select Troubleshoot.

1. Choose Command Prompt from the menu:

Type in the command:
Diskpart
Type in the command:
List disk (Note which disk is your Boot drive number mine is 0)
Type in the command:
Sel disk 0
Type in the command:
List vol (Note which volume is the EFI partition mine is 4)
Type in the command:
Sel vol 4
Type in the command:
assign letter=V:
Type in the command:
Exit
Type in the command:
V:
After you have assigned a drive letter Using Diskpart You can format the EFI partition:
Example: if you assigned a letter V to the partition the command would be:
format V: /FS:FAT32
Type in the command:
bcdboot C:\windows /s V: /f UEFI


Now I have an issue that I cannot install Feature Updates. They keep failing to install.
Any ideas how to resolve issue?

 

Microsoft blocks Windows 10 April Update for Intel SSD 600p Series

Microsoft is blocking some Intel SSDs from installing the April 2018 Update after discovering an incompatibility issue that causes performance and stability issues. In short, the problem was explained by Microsoft as: “When attempting to upgrade to Window 10 April 2018 Update select devices with certain Intel SSDs may enter a UEFI screen reboot or crash repeatedly.” Microsoft says that this issue has no workaround and that those that have attempted to update Windows 10 to the Windows 10 April 2018 Update should revert back to Windows 10 Fall Creators Update version 1709.

Unfortunately, the announcement by Microsoft fails to list what specific Intel SSD models are having issues with the OS update. We contacted Intel and discovered that the Intel SSD 600p Series of client drives that was first introduced to the market in 2016 is the most popular drive that is having issues.

Source: Legit Reviews