Windows 10: How to change Power button action when on battery or plugged in

In this post, we will show you how to change the Power button action […]

This article How to change Power button action when on battery or plugged in first appeared on TheWindowsClub.com.

read more...

 

Plugged in but battery does not charge

If the laptop works without the battery then charger is functioning correctly. Take a cloth with a bit of rubbing alcohol on it (or some on-the-go alcohol swabs), and clean the metal contacts that connect your battery to your laptop.

Make sure to install all Windows important updates.

Install latest versions of your laptop device drivers you can download the latest device drivers from the device manufacturer or from your laptop manufacturer website.


Step 1

1. Shutdown your laptop.

2. Remove the battery.

3. Connect the AC power adapter to your laptop.

4. Power on the laptop

5. Open the Device Manager by typing Devmgmt.msc into Start Menu or from Control Panel.

6. Under the Batteries category, right-click all of the Microsoft ACPI Compliant Control Method Battery listings, and select Uninstall (it’s ok if you only have 1).





7. Shutdown the laptop.

8. Insert the battery.

9. Power on the laptop.

If above suggestions wont resolve the battery charge issue then follow below steps.




Step 2

1. Shutdown the laptop.

2. Remove the battery.

3. Start the laptop with only AC adapter connected to laptop.

4. When you login to Windows OS connect the battery while Windows OS working.





Step 3

Reset the System Management Controller. Use one of these methods to reset the SMC, which controls battery management, battery status light.

1. Shut down the computer and disconnect the power cord.

2. Remove the battery.

3. Press and hold the power button for ten seconds.

4. Reattach the battery and AC power adapter, then start up the laptop.


Hopefully one of the above suggestions will help you resolve the battery not charging problem. If battery still doesn't charge, you may need to replace your battery.

 

Battery Won't Charge Fully

Make sure to install all Windows important updates.

Install latest versions of your laptop device drivers you can download the latest device drivers from the device manufacturer or from your laptop manufacturer website.


Step 1

1. Shutdown your laptop.

2. Remove the battery.

3. Connect the AC power adapter to your laptop.

4. Power on the laptop

5. Open the Device Manager by typing Devmgmt.msc into Start Menu or from Control Panel.

6. Under the Batteries category, right-click all of the Microsoft ACPI Compliant Control Method Battery listings, and select Uninstall (it’s ok if you only have 1).





7. Shutdown the laptop.

8. Insert the battery.

9. Power on the laptop.

If above suggestions wont resolve the battery charge issue then follow below steps.




Step 2

1. Shutdown the laptop.

2. Remove the battery.

3. Start the laptop with only AC adapter connected to laptop.

4. When you login to Windows OS connect the battery while Windows OS working.





Step 3

Reset the System Management Controller. Use one of these methods to reset the SMC, which controls battery management, battery status light.

1. Shut down the computer and disconnect the power cord.

2. Remove the battery.

3. Press and hold the power button for ten seconds.

4. Reattach the battery and AC power adapter, then start up the laptop.


Hopefully one of the above suggestions will help you resolve the battery not charging problem. If battery still doesn't charge, you may need to replace your battery.

 

Use the power button to turn off the computer at Welcome screen

Hi,



Thank you for writing to Microsoft Community Forums.



I understand that you want to turn off computer at the Welcome screen using the power button.



Ideally, if no user has logged in to the computer, the computer will shut down by pressing the power button. However, I would suggest you to check the settings for power button. Refer the steps mentioned below and see if that helps:

1. Press Windows key + X, and select
   Power Options.
   
2. Click on Additional power settings.
   
3. Now, click on Choose what power button does from the left pane.
   
4. Click on Change settings that are currently unavailable.
   
5. Select Shut down from the drop down for
   When I press the power button.
   

If you are using Windows 10 Pro, you may also want to check the Group Policy Settings, refer the steps mentioned below:

1. Press Windows key + R, to open
   Run dialog box.
   
2. Type gpedit.msc and click on
   OK.
   
3. Navigate to Computer Configuration\Administrative Templates\System\Power Management\Button Settings.
   
4. On the right pane, double click on Select the Power button action (plugged in), click on
   Enabled and select Shutdown from the drop down for
   Power Button Action.
   
5. Repeat step 4 for Select the Power button action (on battery).
   
6. Restart the computer.
   

If a user has logged in to the computer and then logs off from the computer, the computer will shut down by pressing the power button. However, if a user is logged in to the computer and locks the computer using the
Windows key + L combination, the power button will not shutdown the computer. You will have to use the power button on the lock screen to shut down the computer.



If you do not see the shutdown button, please refer the article Shutdown:
Allow system to be shut down without having to log on.



If the issue persists, I would suggest you to provide a feedback in the
Feedback Hub. The Feedback hub lets you tell Microsoft
about any problems you run in to while using Windows 10 and send suggestions to help us improve your Windows experience.



Regards,

Nikhar Khare

Microsoft Community - Moderator