Windows 10: my computer not picking up the interface

my computer not picking up the interface

:)

 

Does this computer build have compatibility problems? Opinions welcomed!

Lets start with what you're going to use this computer for, not what you want to put in it.

Rules/steps to building a computer (in chronological order):
First rule: Determine what your needs are.
Second rule: Define your budget.
Third rule: Pick parts.
Fourth rule: Review parts several times.
Fifth rule: Buy said parts.
Sixth rule: Build it.

You are on rule/step 1. Go through the list until you're done.

 

Computer will not pick up audio

Hello,

Thank you for writing to Microsoft Community Forums.

Have you tested a different headset on this computer?

I suggest you to try the following troubleshooting steps and check if that helps.

Method 1: Run the inbuilt troubleshooter for Hardware and devices. Follow the steps mentioned below.

Steps:

1. Tap on Windows + I on the keyboard.
   
2. Select Update and Security option.
   
3. Select Troubleshoot option.
   
4. Click on Hardware and devices option and
   Run the troubleshooter.
   

Method 2: Check if the Microphone is enabled and change it to default. Follow the steps mentioned below to set the microphone as default and enable it.

Steps:

1. Right click on Start button and click on
control Panel.

2. Click in Sound, then a new window will open up.

3. In the new windows click on the tab "Recording” and right click in the window and click on
Show Disabled devices.

4. Now check if the microphone is listed there and highlight the microphone and click on "Set as Default" device.

5. Now right click on it and choose
enable.

Hope it helps.

Sandeep Kumar M

Microsoft Community – Moderator

 

Multichannel audio interface in/out routing

Hi Paulo,



Thank you for writing to Microsoft Community forums.

• What is the make and model of your external audio interface?
• Which routing application are you using?

The configurations of inputs and outputs on any audio interface is dependent on the hardware and its supporting software. Any audio interface with more than 2 inputs and 2 outputs, should ideally give the user an option to map the
Input and Output Config, according to his interest.



I suggest you to go through the user manual provided by your audio interface's manufacturer to know how to set up the control surface.



If it doesn't explain how to configure, I suggest you to get in touch with the audio interface's manufacturer to know how to configure the same.



Hope it answers.

Regards,