Windows 10: 0x8007042B – 0x4000D The installation failed in the SECOND_BOOT phase with an error during...

I have an HP Spectre x360 Convertible 15-df0xxx currently running Windows 10 Home 64-bit, version1803. I have tried upgrading to both version 1909 as well as 20H2 without any success error messages below. I have performed the following to try and remedy:


1. I have uninstalled Norton Security.

2. Under command prompt, I have run the following as administrator, all of which have returned no errors

a. Sfc / scannow

b. DISM.exe /Online /Cleanup-Image /Scanhealth

c. DISM.exe /Online /Cleanup-Image /RestoreHealth

3. Under Control Panel -> Admin Tools I have freed up disk space there is over 300GB of space so this is clearly not he issue and cleaned up system files

4. To provide a clean upgrade environment, I have run the following commands in command prompt:

a. Net stop wuauserv

b. Net stop cryptsvc

c. Net stop bits

d. Net stop msiserver

e. ren c:\windows\softwaredistribution softwaredistribution.old

f. ren c:\ESD ESD.old

g. Net start wuauserv

h. Net start cryptsvc

i. Net start bits

j. Net start msiserver

5. I have also run chkdsk c: /f /x /r – no errors reported.

6. When trying to do an upgrade via system->Update & Security -> Check for updates, it tries to upgrade first to v20H2 “failed to install – 0x8007042b” and after that fails it has tried to upgrade to 1909 which also fails “failed to install – 0x800f0830”.


7. I have downloaded Windows Media Creation tool and I get the following error: 0x8007042B – 0x4000D The installation failed in the SECOND_BOOT phase with an error during MIGRATE_DATA operation


I’m all out of ideas as to how to fix this issue now. Any help would be appreciated.

:)

 

0xC1900101 - 0x4000D Setup failed in SECOND_BOOT phase with an error during MIGRATE_DATA operation

• 0xC1900101 - 0x4000D
• Setup failed in SECOND_BOOT phase with an error during MIGRATE_DATA operation

 

Windows 10 upgrade 1909 to 2004 failed with error 0x8007042b - 0x4000D

So, I still get the same error message after the rollback: Error 0x8007042b - 0x4000D The installation failed in the SECOND_BOOT phase with an error during MIGRATE_DATA operation

performed the following:

1. all windows features turned off (as advised above)
2. clean boot per https://support.microsoft.com/en-us/help/929135/how-to-perform-a-clean-boot-in-windows
3. attempted the upgrade using media creation tool

a new set of logs uploaded here: https://1drv.ms/u/s!Akui4acu0VPSiCowe_3DzvJCYuAw?e=XBgWf8

any advise?

Thanks,

AZY.

 

0xC1900101 - 0x4000D The installation failed at the SECOND_BOOT phase with an error during MIGRATE_DATA operation.

I Have the same issue upgrading from 1511.

Tried everything that I have found and still fails with error 0x01900101-0x4000D

Installation failed in the SECOND_BOOT phase during MIGRATE_DATA operation.

I have reinstalled and update all drivers

Any ideas?