Windows 10: The Microsoft (Hotspot) wi-fi direct virtual adapter is blocking FTP

Hi Support,

I have encountered an unexpected problem when using the Windows 10 Hotspot feature. When I connect to the hotspot using another Win 10 system everything works as normal except it blocks the FTP protocol.

I have an application that connects to a website using FTP, it has run with no problems for 5+ years. I now have a situation where I am using a Win 10 laptop to boost the signal of a wi-fi router in another building. It is located to get the best signal and it works fine, it broadcasts a strong signal allowing other devices to use it.

However, when connecting to the Win 10 Hotspot the FTP protocol is blocked, everything else runs as normal
I have confirmed:

• I can FTP as normal if I connect to the same router as the Win 10 system that is step up with the hotspot.
• If I connect to the Win 10 hotspot FTP is blocked.

This is the first time I've used the hotspot feature in Win 10, I really like it and it's ideal for my situation but the FTP problem limits how much I can use it.

All other protocols work as normal, it's as if a rule somewhere is set to block FTP if passing through the Microsoft (Hotspot) wi-fi direct virtual adapter.

See attached images for the status of the hotspot adapters, they both have the following settings.

IPv4Connectvity: Internet
IPv6Connectvity: No network access

I can FTP from the system with the hotspot setup using the built-in wi-fi adapter with no problems, it's only when I connect via the hotspot that FTP gets blocked.

I've tried a few things to change the IPv6Connectvity but no success so far. Also, if this was the problem why only block FTP and allow all other protocols and why does the built-in wi-fi adapter allow FTP as normal yet it displays IPv6Connectvity: No network access?

It's easy to try and reproduce this condition, all you need is two Win 10 systems and an FTP account on the web.

• Setup Laptop1 to connect to Router1 and also set up a hotspot called Hotspot1.
• On Laptop2 connect to Router1 and use the command-line FTP client to log in to your FTP server.
• There should be no problems doing this.
• Next on Laptop2 connect to Hotspot1 and try to log in again to your FTP account.

If this fails then you will have reproduced the same failure.

Note:

• I am using ACER Win 10 laptops that are fully updated.
• All the ACER laptops use the built-in Windows Firewall and Security Centre.
• When connecting to the Hotspot both Outlook and OneDrive detect it as a metered connection and prompt you to confirm you wish to still connect. When you confirm you still want to connect everything runs as normal.
• This problem occurs at two different locations that use different laptops, routers, and broadband provider (UK: EE & Virgin)

I have not been able to try this on a non-ACER laptop so that would be useful to do but my testing so far has isolated the problem to only when connecting via the Hotspot.

So, in summary.

• When connecting to a Windows 10 Hotspot all other applications run as normal except for FTP.
• I have confirmed this on separate laptops (though they are all ACER) and two different routers and broadband providers at different locations.

It would be great if someone could test this on non-ACER laptops and another broadband provider. If the problem is present then it would suggest this issue is widespread but I've not been able to find anyone else who's experienced this problem.
thanks,Phill.









:)

 

Wi-Fi virtual adapter

I am unable to create a wi-fi hotspot on my laptop (HP pavillion ab-032tx model) after upgrading to windows 10. I cannot find Microsoft WI-Fi direct Virtual adapter in the listed adapters (control pannel->network sharing center) . However Microsoft Wi-Fi
direct Virtual adapter and Microsoft Wi-Fi direct Virtual adapter #2 are listed in hidden drivers (device manager-> view tab, faded icons). Upon checking for hardware changes, there are no unkown devices being shown. Microsoft Wi-Fi direct Virtual adapter
#3 is also found in the view tab , but its icon is not faded. All my drivers are updated. Still i am unable to create a hotspot. Pl help me with the same.

 

Microsoft Direct Virtual Wi-Fi Adapter

How can I remove Microsoft Virtual Direct Wi Fi Adapter.

I see under device manager I see Microsoft virtual direct wi fi adapter. If I remove it, delete it , it comes back. I can only disable it.

This is what I know and I investigated to find out.

**** This is a feature which is used to create hotspot make the pc/laptop as a hotspot for other computers to connect to or covertly connect to the computer. ( my issue on my laptop ).

problem:

when I do ipconfig/all it list a Microsoft Direct virtual Wi-Fi Adapter as active. even though I never activated this, I don't even know how to activate this.

I am try to deactivate virtual adapter. I am not able to do .

I tried using netsh wlan disallow.., it doesn't work. it the virtual adapter stays activated.

I also tried network reset, no change.

I formatted hard drive and reinstalled windows. no change.

I used recovery media to wipe out hard drive and install the factory defaults. no effect.

I have windows 10 home edition. ( this windows is not even compatible with hyper-v virtual features.

I AM UNABLE TO REMOVE OR DE-ACTIVATE THIS VIRTUAL ADAPTER.

I have contacted Lenovo, they couldn't help me.

I called couple of support professional website they couldn't help they didn't know much about network/adapters.

need help!!!

 

disable permanently Microsoft Wi-Fi Direct Virtual Adapter

Hi,

I understand that you are facing problems with Microsoft Wi-Fi Direct Virtual

Adapter.



I can understand the frustration, were in you want to uninstall the driver

completely. I will try to help you in fixing the issue.

Microsoft Hosted Network Virtual Adapter is used for creating portable

hotspot on PC. Microsoft Wi-Fi Direct Virtual Adapter is used once two Wi-Fi

direct devices are paired using Windows Pairing experience user

interface.

To help you suggest more steps to resolve the issue, I would appreciate if

you could answer the following questions:

1. Which operating system was installed prior to Windows 10?

2. Are you

able to connect to the Internet using wireless connection?

4. Have you

made any recent hardware or software changes to your computer prior to the

issue?

Follow the below methods and check the issue:

a. Go to command prompt

as admin and type as “netsh wlan stop hostednetwork” (without no

quotes).

b. Then type this “netsh wlan set hostednetwork

mode=disallow”.

Reference: It disables the service and the Microsoft wifi miniport is gone.

For some reason its mode gets set to allow instated of disallow and when you

uninstall it reappears and messes up the networking, example, printers, wifi

routers, etc.

Please revert back with the information the ongoing issue with the

Microsoft Wi-Fi Direct Virtual Adapter. We would be glad to assist

you.

Thank you.