Windows 10: BSOD after update, I lost all my usb.

I crashed hard!!! Typically fixes are easy for me!!!However I lost all of my usb devices.I fix up phones and computers on the side.Well DID. I’m currently without all of my equipment due toLeaving a very bad situation.My computer backup crashed after updating.I’ve tried everything.Clean update right?All I have is iPhones, couple donated androids that are lockedAnd a windows phone that is locked. How do I get the recovery image on the dell?

:)

 

USB boot for bios update

Did the first step. It already doesn't work. Note the capacities and drive letters M:/N: The HP utility is about to format my raid-1 volume containing my 2 750gb drives. It thinks it's the usb stick. I can not select any other drives in the HP utility. My 512mb usb stick is U:.

Any other suggestions?

 

lost all data on USB deive after scan disk

Hello,

For us to be able to assist you, we suggest that you try to follow the steps provided on the link given below:

• Automatically diagnose and fix Windows USB problems

Update us on the result.

 

BSOD on install from USB

Have an HP Notebook 14-cf0013dx, 8gb ram, 1TB HDD 5200rpm (full specs are in profile)

Attempting to reinstall windows after BSOD on start, mostly page fault in non paged area BSOD error but can also be irql not less or equal, or Kernel Secure check failure. Saw another one or two but cannot recall at the moment.

Symptoms. Can boot to USB in UEFI or legacy and Load the windows 10 install made from the windows creation tool. The loading files completes. The system restarts and the HP splash screen appears with the windows 10 dots circling underneath for about 2 revolutions then a BSOD.

First steps:
Tried windows 10 recovery. over 48 hours still not completed.
Ran HP hardware diagnostics, Memory HDD, system board all passed.
Ran memtest86 from Hirens Boot CD. passed.
Ran seagate HDD test. passed.
Tried windows 10 USB install after each step above.
Tried Windows 10 safe mode installation, was able to get through installation but on reboot the same results, BSOD within 3 revolutions of startup dot-circle.

Second steps:
Removed HDD, hooked up to main computer and did a CMD, DISKPART, CLEAN
Updated BIOS to most recent version F.53 to support windows 10 v.1909
Moved DIMM from slot 1 to slot 2
Tried HP cloud recovery with exact same results as listed above.
Tried Windows 10 USB safemode install again same results. Was able to complete installation from USB but BSOD on restart.

Short of replacing the Motherboard due to the integrated graphics memory (which still tested good in HP system board test), I am at a loss. Please help with any suggestions.