Windows 10: How do I switch on my laptop after a failed factory reset?

A week ago I wanted to reset my laptop because I had forgotten my password. It was stuck at 64% for the whole week. I accidentally closed the laptop, now I want to switch it on so that I could start the factory reset process again. The issue is that it does not want to switch on. The power icon keeps switching on and off. How do I fix this? I really need my laptop to complete my work.

:)

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".

 

Windows 10 Factory Reset Failed

Thank you for your response DaveM121

No, nothing else is connected to my laptop at all. I attempted the factory reset through the command prompt because it would fail (several times) by using the steps you're suggesting. It began the process and I waited at least 4 hours for it to slowly reach
a higher percentage (it got to more than 80%) and when I looked at the laptop again, there was a failure message.

 

how do i reset a asus laptop to factory settings?

The process of resetting an Asus laptop to factory settings can vary depending on the model and operating system. However, here are the general steps you can follow:

1. Back up your important files and data to an external hard drive or cloud storage as resetting your laptop to factory settings will erase all data.
   
2. Press the "F9" key repeatedly while the Asus laptop is booting up. This will take you to the recovery menu.
   
3. Select "Restore factory settings" from the menu.
   
4. Follow the prompts to confirm the reset process.
   
5. Wait for the reset process to complete, which may take several minutes.
   
6. Once the reset is complete, your Asus laptop will be restored to its original factory settings.