Windows 10: M.2 SSD is not showing in Windows 11

​

For some users, the M.2 SSD is not showing in their Windows 11 computers. When they checked in the BIOS, they found that the M.2 SSD was there. However, when they boot into Windows, the SSD disappears. If you encounter this issue, the solutions provided in this article will help you fix it. M.2 SSD […]

This article M.2 SSD is not showing in Windows 11 first appeared on TheWindowsClub.com.

read more...

 

SATA SSD and M.2 SSD

i was with a ssd sata and now i have ssd m.2, i formatted and put windows 11 in m.2, but i did not remove the ssd sata, i can only boot windows with the ssd sata connected, if i remove it windows does not boot to m.2



obs: windows was installed on m.2 but the ssd sata was still connected, but windows was 100% installed on m.2, is there any way I can set m.2 as primary? (when i removed the ssd sata it did not recognize windows)

Sorry for my bad English

https://i.imgur.com/oUFEEOp.png

 

Bios sees SSD M.2 but not windows 11 installation

I have an R11 Aurora. CPU is I5 10400f, 2 16MB of Vengeance pro ram. GTX 1650 GPU. I recently acquired a 1TB NVeM M.2 SSD drive to swap out my 256gb. Upon putting it in my Bios sees that the drive is there. But windows 11 installation does not. I've brought up the command prompt and looked on the disk list and it doesn't show the drive there. Only my external drive with the key pops up in the command prompt. I'm at a complete lost rn

 

My m.2 ssd is recognized in bios, but not as a boot device

Thank you very much for reaching out! As an Independent Advisor and fellow Microsoft user, I'm more than happy to assist you.

Here are some steps you can take to troubleshoot and potentially resolve this issue:

1. Check BIOS Settings

Ensure that your BIOS settings are correctly configured to recognize the M.2 SSD as a boot device:

• Enable CSM (Compatibility Support Module): Sometimes, enabling CSM can help the BIOS recognize the SSD as a boot device. You can find this option under the Boot tab in the BIOS settings.
  
• Set Boot Priority: Make sure the M.2 SSD is set as the first boot device in the boot priority list.
  

2. Update BIOS

Updating your motherboard's BIOS to the latest version can resolve compatibility issues with new hardware:

• Visit the ASUS official website to download the latest BIOS update for your ROG Strix B650 Wi-Fi motherboard.
  

3. Reinstall the SSD

Ensure that the M.2 SSD is properly installed:

• Remove the SSD and reinsert it firmly into the M.2 slot. Make sure it is securely fastened with the screw.
  

4. Initialize the SSD

If the SSD is new, it might need to be initialized:

• Boot into Windows using another drive, open Disk Management, and initialize the SSD as either MBR or GPT.
  

5. Check for Drive Mode Compatibility

Ensure that the M.2 slot you are using supports the type of SSD you have (SATA vs. NVMe):

• Some M.2 slots only support either SATA or NVMe, not both. Refer to your motherboard manual to confirm compatibility.
  

6. Repair Boot Configuration

If the SSD has Windows installed but is not recognized as a boot device, you might need to repair the boot configuration:

• Boot from a Windows installation USB, go to the command prompt, and use the following commands:
  
  
  This can help rebuild the boot configuration data.
  

7. Check for Hardware Issues

If none of the above steps work, there might be a hardware issue with the SSD or the motherboard:

• Test the SSD in another system to see if it is recognized as a boot device.
  
• If the SSD works in another system, the issue might be with the motherboard. Consider contacting ASUS support for further assistance.
  

Please feel free to reach out if you require any additional assistance. I'm here to help!