Windows 10: CPU Over Voltage Error, Press F1 to Run SETUP

Discus and support CPU Over Voltage Error, Press F1 to Run SETUP in Windows 10 News to solve the problem; [ATTACH]If you encounter the CPU Over Voltage Error on system startup, this article will help you identify the cause and fix this problem. When you... Discussion in 'Windows 10 News' started by WinClub, Nov 18, 2026 at 3:12 PM.

  1. WinClub New Member

    CPU Over Voltage Error, Press F1 to Run SETUP


    CPU Over Voltage Error, Press F1 to Run SETUP CPU-over-voltage-error.png ​
    If you encounter the CPU Over Voltage Error on system startup, this article will help you identify the cause and fix this problem. When you turn on your PC, it performs a POST (Power-On Self-Test). If any issue is encountered during the POST, booting into Windows is halted, and you get stuck at the POST […]

    This article CPU Over Voltage Error, Press F1 to Run SETUP first appeared on TheWindowsClub.com.

    read more...
     

  2. Press F1 to continue!

    Okay, this is what is on the "Press-F1 screen":

    Phoenix - AwardBIOS v6.00PG, An Energy Star Ally
    Copyright (C) 1984-2003, Phoenix Technologies, LTD

    K8M800-M7 A (K8M8M111 BS)

    Main Processor : AMD Athlon (tm) 64 Processor 3200+
    Memory Testing : 1047552K OK + 1M TSeg memory

    IDE Channel 0 Master : DVDRW 16X16X YTS1
    IDE Channel 0 Slave : None
    IDE Channel 1 Master : None
    IDE Channel 1 Slave : WDE WD2500BB-55GUC0 08.02D08

    IDE Channel 2 Master : None
    ***Floppy disk(s) fail (40)one***




    Press F8 to Enable System Configuration
    Press F9 to Select Booting Device after POST
    Press F1 to continue, DEL to enter SETUP
    01/11/2007-K8M800-8237-6A7L1B0SC-00

    I'm going to try some of the things that you guys suggested now.

    Well, I figured out what was wrong. It took all of about 2min. of investigation, LOLz. I just never took the time to try to figure it out because it really didn't bother me to press F1.

    Thanks for the help guys!
     
    Franklinwallbrown, Nov 18, 2026 at 3:15 PM
    #2
  3. CPU voltage has gone nuts after the latest windows update

    Windows asked me to restart my desktop for updates, so I did.

    On restart I get CPU fan error and CPU voltage errors. I have a water cooled CPU so I have the fan detection disabled. I go into bios and my CPU voltage is going nuts. On a 4790k it is reading as 2.8v at times, which is crazy. Previously I have it set at
    1.298v with adaptive. Well I thought no biggie i'll just re disable the CPU fan monitor and set a manual voltage and force it to 1.298v and fix it when in windows. I save and exit and do a full power disconnect cycle and have no luck on the restart. The CPU
    is still listing a fan error and CPU voltage error and even though I have forced the CPU to 1.298v on manual it is still reading it as hitting 2.5v.

    I have no idea how to fix this.

    My usual specs are a 4790k running at 4.6 GHz @ 1.298v adaptive, ram running the XMP profile on it, z87 deluxe motherboards, evo 840 SSD as boot drive, GTX 770. Only the CPU is under water at the moment.

    Any help would be greatly appreciated!

    EDIT: I read about it possibly being the power supply being faulty. It could have been coincidence that it went a the same time as the update.
     
    AndrewCaneppele, Nov 18, 2026 at 3:15 PM
    #3
  4. Bree Win User

    CPU Over Voltage Error, Press F1 to Run SETUP

    Press F1 to continue when booting up

    I have a Dell Latitude E4310 that does/did the same thing. In my case it was because the power adapter wasn't being recognised correctly. There is a 3rd wire in the centre of the plug that carries data identifying the power capabilities of the supply, and the socket on the laptop had a poor connection. In addition to F1 to continue or F2 to enter setup, there was another option to continue and ignore this error in future.
     
Thema:

CPU Over Voltage Error, Press F1 to Run SETUP

Loading...
  1. CPU Over Voltage Error, Press F1 to Run SETUP - Similar Threads - CPU Voltage Error

  2. CPU Fan Speed Error Detected: Press F1 to run setup message at Windows boot

    in Windows 10 News
    CPU Fan Speed Error Detected: Press F1 to run setup message at Windows boot: Hardware devices such as laptops can develop issues with a CPU fan. So, during the startup, users can see an error, bearing the following message – CPU Fan error: Press F1 to run setup. It is a common error message that can be resolved by taking appropriate action. CPU Fan...
  3. Is there any way to setup a screensaver that runs over the screen image?

    in Windows 10 Ask Insider
    Is there any way to setup a screensaver that runs over the screen image?: I know it was possible in older versions of Windows to run a screensaver like bubbles in front of the screen image, the bubbles float in front of the page that was displayed. This appears to not be possible anymore? I would like to continuously display my planner on my...
  4. F1 error

    in Windows 10 BSOD Crashes and Debugging
    F1 error: [IMG] Before I changing my cmos battery it shows the same error now I change my cmos battery it still shows same Press enter to recover bios settings Press f1 to setup It shows same error When I start my pc fan stops and then after few seconds it run and this error...
  5. "Strike the F1 key to continue, F2 to run setup the utility"

    in Windows 10 Performance & Maintenance
    "Strike the F1 key to continue, F2 to run setup the utility": My windows 10 overcharged, and now it dies when unplugged. Whenever i boot it up, it shows a message, following the lines of "This battery charging is temporarily disabled. Press F2 following BIOS Setup", or "The system cannot identify this battery, it will be unable to...
  6. Worry Voltage with CPU

    in Windows 10 Drivers and Hardware
    Worry Voltage with CPU: Hey guys, so since installing my AMD 3700x on a MSI Gaming pro carbon wifi everything as been fantastic, well apart from temperatures and voltage for the cpu. I have not overclocked the CPU just enabled X.M.P in bios, I'm using an air cooler with two Corsair SP120mm fans with...
  7. Fix CPU Over Temperature Error

    in Windows 10 News
    Fix CPU Over Temperature Error: [ATTACH] [ATTACH]Imagine a situation where you boot your computer, but the operating system doesn’t load; instead, you get the “CPU Over Temperature Error!” error. In such a situation, you wouldn’t be able to boot into the system in any mode, and [...] This post Fix CPU Over...
  8. pressing f1 opens a web browser.

    in Windows 10 Network and Sharing
    pressing f1 opens a web browser.: Hello Community, Whenever i press f1 , it opens a new tab in the chrome browser. I have googled for a solution, but none of those worked. i will explain what i tried: So i read on the internet to change the file name called HelpPane.exe and it should block everything. (...
  9. pressing f1 opens a web browser.

    in Windows 10 Customization
    pressing f1 opens a web browser.: Hello Community, Whenever i press f1 , it opens a new tab in the chrome browser. I have googled for a solution, but none of those worked. i will explain what i tried: So i read on the internet to change the file name called HelpPane.exe and it should block everything. (...
  10. CPU Voltages: Is there something odd in this...

    in Windows 10 Drivers and Hardware
    CPU Voltages: Is there something odd in this...: Is there something odd here? Voltage CPU CORE 1.072 V MEMORY CONTROLLER 3.008 V +5V 5.027 V +12V 4.480 V -12V -8.576 V -5V -8.576 V +5V HIGH THRESHOLD 4.973 V CMOS BATTERY 3.232 V Some of the right hand figures differ substantially from those on the left. Do they tell...