Windows 10: 0xc0000098 On new M.2 SSD

Ive been trying, (unsuccessfully) to install a usb copy of windows 10 onto my new 1tb m.2 ssd.

So far i have tried just about every boot option my bios has and i cant get the program to load.

when i boot up my other drive that currently has a working copy of windows the usb and program seem to load fine. But the m.2 drive is the only one connected when i try to boot the program

So i am just unsure if i am missing something when it come to the m.2 interface or if there something else i am doing wrong.


specs: asus rampage v edition 10: i75860k:32gbram

:)

 

M.2 SSD Partitioning

My OS is installed on an 128GB SATA SSD,

All other applications, when ever possible I used to install on another 60 SATA SSD.

I am very happy with the performance. It is pretty fast, better than if it were on the same disk. I have tested the difference.

Now I have a new ASUS ROG Strix B450-F Gaming Motherboard with Two M.2 slots.

I am going to buy a 512 GB M.2 SSD.

As I have under stood the SSD consists of 4 Nos of NAND Chis.

Therefore on each NAND chip, I presume will have capacity of 64 GBs.

My question is are they really independent ?

Can they behave as independent Hard disks?

If yes,

Can I partition my new M.2 SSD into an 198GB and 64GB partitions -that means 3 NAND chips and one NAND Chip?

and enjoy the same or better speed than before that I had with the SATA SSD?

Dr Abdul Rasheed

 

M.2 SSD not being able to boot from it, windows doesn't recognise.


Ok, this is what happened after all the comments and suggestions, @Dude: Thanx for the video, my mb had non e of those settings, it had the raid/option memory gene or achi. Can only choose one or the other. @Saltgrass, my settings did point out auto and enabled the pcie x4, gen 3. I did an bios flash as suggested, because my bios was not the latest version, after a reformat the m.2 was picked up, still cant install OS onto it as it states legacy not found, removed my dvd rom from the sata port to another, and the drive was found and installed. Only issue now is that it's still not my OS drive but it at least now works and is installed, but on the Intel rst drive the obtain memory gene option to enable is greyed out, and shows as disabled. However the program lists the M.2 and it is working 100%,. I installed overwhatch onto it, it performs perfectly. But will update the intel driver tonight and see if that makes any difference. Seems the bios flash enabled the settings listed by @Dude that was not present pre-flash.

So the m.2 drive works. I can game off it and install omnto it. Can not install windows on it, gene memmory is enabled, pcie x4 is on and on auto detect, Motherbaord lists all the drives connected, motherboard ahs been updated to latest bios. After flash new settings became available, m.2 is now on memmory gene enabled not achi, windows os is enabled and fast boost is enabled, intel rst is installed and lists all the ssds and the m.2, however the m.2 on memmory gene is dissabled and the option to enable is greyed out. Will update the driver as Essenbe suggested of the m.2 and see if anything changes. Thank you all for the help, I can now atleast use my m.2

 

How to check M.2 SSD Health ?

Hi friends,

I have a problem while checking my SSD Health. The application like SSD-Life can't recognize my M.2 SSD. My Notebook is HP Spectre 13.

Any suggestion ?

Thanks