Windows 10: 1394 OHCI Bus controller

Hi all! so i have been facing this issue lately where my "1394 OHCI Compliant host user" has stopped working all it says is "this device cannot start code 10". with this error i cannot connect my USB with my PC, the PC doesn't even detect it. I have done everything which was possible at my end :- 1 Re installed the driver, restarted PC 2 Disabled and re-enabled the driver I again tried to re install the driver but all it says is :-

:)

 

Windows 10 ≡ (1903) PCIe Firewire card (Microsoft-Windows-Kernel-PnP - 1394 OHCI event error).

Did you try this troubleshooting step:

Press the Windows key + R.

Enter devmgmt.msc.

Click OK.

In Device Manager, expand IEEE 1394 Bus host controllers.

Right-click on 1394 OHCI Compliant Host Controller.

Click Update Driver Software.

Click Browse my computer for driver software.

Click Let me pick from a list of device drivers on my computer.

Click 1394 OHCI Compliant Host Controller (Legacy).

Click Next.

When Windows has finished installing the driver, click Close.

 

LSI 1394 OHCI Compliant Host Controller

First Enable 1394 in the Bios. Boot into Windows and Go to the Device Manager, expand IEEE 1394 and right click the LSI device and choose Update Driver. Choose Browse my computer for driver software. Choose Let Me Pick from a list. Choose the 1394 OHCI compliant Host Controller instead of the LSI choose Next.

 

LSI 1394 OHCI Compliant Host Controller

Hi, I need help to solve an issue I have with my LSI 1394 OHCI Compliant Host Controller.

I noticed an exclamation mark in Device Manager next to my 1394 Host Controller and despite turning 1394 off in my BIOS it keeps coming back. I've also tried to disable and uninstall this device in Device Manager, with the same result, and when I try to update it I get an error (see screenshots below).

First screenshot, 1394 disabled in BIOS (American Megatrends 5.43).





Second screenshot, 1394 exclamation mark in Device Manager.





Third screenshot, error Code 10, Device doesn't start, STATUS_DEVICE_POWER_FAILURE.





The following screenshot is taken when trying to update 1394 manually and selecting LSI 1394 [...]





My final screenshot is another error message of the subsequent page in the update process.
Translated from Dutch it says, A problem occurred installing driver files for your device.
Driver files have been found but an error occurred trying to install them.






Device doesn't start (Code 10). If you know who the manufacturer is of your device, you can visit their website support section to check if there are device driver updates available.
---------------------------------------------------------------------------------------------------------------

Don't know what the cause is.
My PC is up-to-date (OS, Drivers, important software) and otherwise i don't experience problems.

Tho I find it peculiar to see an error in Device Manager when that particular device is deliberately turned off in my BIOS. And before you ask, yes when I turn 1394 On in my BIOS I experience the same issue...

Hopefully there' someone reading this cry for help and can offer me adequate assistance.

Thanks in advance, regards Carlo.

Third screenshot, error Code 10, Device doesn't start, STATUS_DEVICE_POWER_FAILLURE.