Windows 10: 64 bit compatibility

I want to know whether my pc will support 64 bit windows 10 pro or not?
Currently I'm using 32 bit widows 10 pro activated with digital license.


This is the screenshot of my settings about page.





This is the screenshot of my "system information".



Here is the coreinfo report.

Coreinfo v3.31 - Dump information on system CPU and memory topology
Copyright (C) 2008-2014 Mark Russinovich
Sysinternals - www.sysinternals.com
Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz
x86 Family 6 Model 142 Stepping 9, GenuineIntel
Microcode signature: 00000084
HTT * Hyperthreading enabled
HYPERVISOR - Hypervisor is present
VMX * Supports Intel hardware-assisted virtualization
SVM - Supports AMD hardware-assisted virtualization
X64 * Supports 64-bit mode
SMX - Supports Intel trusted execution
SKINIT - Supports AMD SKINIT
NX * Supports no-execute page protection
SMEP * Supports Supervisor Mode Execution Prevention
SMAP * Supports Supervisor Mode Access Prevention
PAGE1GB * Supports 1 GB large pages
PAE * Supports > 32-bit physical addresses
PAT * Supports Page Attribute Table
PSE * Supports 4 MB pages
PSE36 * Supports > 32-bit address 4 MB pages
PGE * Supports global bit in page tables
SS * Supports bus snooping for cache operations
VME * Supports Virtual-8086 mode
RDWRFSGSBASE * Supports direct GS/FS base access
FPU * Implements i387 floating point instructions
MMX * Supports MMX instruction set
MMXEXT - Implements AMD MMX extensions
3DNOW - Supports 3DNow! instructions
3DNOWEXT - Supports 3DNow! extension instructions
SSE * Supports Streaming SIMD Extensions
SSE2 * Supports Streaming SIMD Extensions 2
SSE3 * Supports Streaming SIMD Extensions 3
SSSE3 * Supports Supplemental SIMD Extensions 3
SSE4a - Supports Streaming SIMDR Extensions 4a
SSE4.1 * Supports Streaming SIMD Extensions 4.1
SSE4.2 * Supports Streaming SIMD Extensions 4.2
AES * Supports AES extensions
AVX * Supports AVX intruction extensions
FMA * Supports FMA extensions using YMM state
MSR * Implements RDMSR/WRMSR instructions
MTRR * Supports Memory Type Range Registers
XSAVE * Supports XSAVE/XRSTOR instructions
OSXSAVE * Supports XSETBV/XGETBV instructions
RDRAND * Supports RDRAND instruction
RDSEED * Supports RDSEED instruction
CMOV * Supports CMOVcc instruction
CLFSH * Supports CLFLUSH instruction
CX8 * Supports compare and exchange 8-byte instructions
CX16 * Supports CMPXCHG16B instruction
BMI1 * Supports bit manipulation extensions 1
BMI2 * Supports bit manipulation extensions 2
ADX * Supports ADCX/ADOX instructions
DCA - Supports prefetch from memory-mapped device
F16C * Supports half-precision instruction
FXSR * Supports FXSAVE/FXSTOR instructions
FFXSR - Supports optimized FXSAVE/FSRSTOR instruction
MONITOR * Supports MONITOR and MWAIT instructions
MOVBE * Supports MOVBE instruction
ERMSB * Supports Enhanced REP MOVSB/STOSB
PCLMULDQ * Supports PCLMULDQ instruction
POPCNT * Supports POPCNT instruction
LZCNT * Supports LZCNT instruction
SEP * Supports fast system call instructions
LAHF-SAHF * Supports LAHF/SAHF instructions in 64-bit mode
HLE - Supports Hardware Lock Elision instructions
RTM - Supports Restricted Transactional Memory instructions
DE * Supports I/O breakpoints including CR4.DE
DTES64 * Can write history of 64-bit branch addresses
DS * Implements memory-resident debug buffer
DS-CPL * Supports Debug Store feature with CPL
PCID * Supports PCIDs and settable CR4.PCIDE
INVPCID * Supports INVPCID instruction
PDCM * Supports Performance Capabilities MSR
RDTSCP * Supports RDTSCP instruction
TSC * Supports RDTSC instruction
TSC-DEADLINE * Local APIC supports one-shot deadline timer
TSC-INVARIANT * TSC runs at constant rate
xTPR * Supports disabling task priority messages
EIST * Supports Enhanced Intel Speedstep
ACPI * Implements MSR for power management
TM * Implements thermal monitor circuitry
TM2 * Implements Thermal Monitor 2 control
APIC * Implements software-accessible local APIC
x2APIC * Supports x2APIC
CNXT-ID - L1 data cache mode adaptive or BIOS
MCE * Supports Machine Check, INT18 and CR4.MCE
MCA * Implements Machine Check Architecture
PBE * Supports use of FERR#/PBE# pin
PSN - Implements 96-bit processor serial number
PREFETCHW * Supports PREFETCHW instruction
Maximum implemented CPUID leaves: 00000016 (Basic), 80000008 (Extended).
Logical to Physical Processor Map:
*-*- Physical Processor 0 (Hyperthreaded)
-*-* Physical Processor 1 (Hyperthreaded)
Logical Processor to Socket Map:
**** Socket 0
Logical Processor to NUMA Node Map:
**** NUMA Node 0
No NUMA nodes.
Logical Processor to Cache Map:
*-*- Data Cache 0, Level 1, 32 KB, Assoc 8, LineSize 64
*-*- Instruction Cache 0, Level 1, 32 KB, Assoc 8, LineSize 64
*-*- Unified Cache 0, Level 2, 256 KB, Assoc 4, LineSize 64
**** Unified Cache 1, Level 3, 4 MB, Assoc 16, LineSize 64
-*-* Data Cache 1, Level 1, 32 KB, Assoc 8, LineSize 64
-*-* Instruction Cache 1, Level 1, 32 KB, Assoc 8, LineSize 64
-*-* Unified Cache 2, Level 2, 256 KB, Assoc 4, LineSize 64
Logical Processor to Group Map:
**** Group 0

Thanks.

:)

 

compatibility with XP 32 bit and 64 bit

Can I transfer the AV FILES FROM WINDOWS XP 32 BIT and 64 bit OS of my desktops?Are there any addons required to be installed for the same.

Please suggest.

 

Compatibility with 64-bit OS

No there is virtually no compatibility issues these days.

 

Windows 10 Upgrade 32-bit to 64-bit

So, Windows 10 Upgrade is being rolled out worldwide, and I have 'reserved' my upgrade.

Currently my computer is running Windows 7 Pro 32-bit. I'm planning to 'upgrade' it to Windows 10 64-bit (via fresh install, of course).

After reading many references, these will be the steps I'll do:

1. Let the "Get Windows 10" app upgrade my OS to Windows 10 32-bit
   
2. Note the activation key
   
3. Download the Installation Media for Windows 10, but choosing 64-bit instead
   
4. Perform a clean install
   
5. Reactivate using the activation key in Step #2
   

(Of course I'll backup my data first.)

However, I still have some questions:

1. On Windows 7, the activation key does not differ between 32- or 64-bit versions. Is it still so with Windows 10?
   
2. Will I be able to download a different architecture on Step #3?
   
3. Is there anything I need to prepare beforehand?
   

Thank you for your assistance.