Windows 10: Acer aspire sw5-014_014,not charging

My acer aspire sw5-014 the charger has stopped working

:)

 

Vintage: Acer Aspire One 722 {Ram Questions}


Hi Captain.

While I'm not answering your question on a new AV I would suggest as a possible step, upgrading your ram.

Crucial has ram for your device. $40 (not sure about tax or shipping) Your device seems to have one slot so you would need the 4GB stick. As you are using 32bit OS you can only use of 3GB. Crucial says you have one slot for memory and tear down videos seem to confirm this.

Here is the Crucial Link. Confirm for yourself that this is the right device. (Acer Aspire One 722-0022)

http://www.crucial.com/usa/en/compat...e-one-722-0022

Then here are the step by steps to replace.

https://www.ifixit.com/Guide/Acer+As...lacement/53216

Memory is static sensitive. Not as much of an issue when it is humid but still something to be aware of. If you don't want to buy a ground strap touch something that is grounded before starting the procedure and then don't go looking for things. Stay seated and perform. You should be fine.

External ram ??? Even if you could buy you wouldn't have port with sufficient speed to connect.

Ken

 

Acer Aspire 5560 not upgrading to windows 10

That Error Code seems to be most frequently associated with/pointing to incompatible Drivers. The Acer Aspire 5560 Model is only listed on the Acer Site under 'Legacy Hardware' as far as I can tell, which suggests they may not be too interested in providing
further firmware/driver updates, but you could try asking on their Forums. According to this site ( http://www.notebook-driver.com/acer/acer-aspire-5560-5560g-windows-driver-utility/ ) the last updates were released in 2012!

 

Wi-Fi not working on Acer Aspire Switch 10 SW5-012

Hello,

I'm having problems trying to fix an issue with my Acer Aspire Switch 10 SW5-012 network adapter on Windows 10. It's a Broadcom 802.11abgn SDIO Wireless SDIO Adapter. My Wi-Fi icon says "no networks available" and my Bluetooth stopped working completely
as well. On the device manager page, Broadcom Serial Bus Driver over UART Bus Enumerator displays an exclamation mark. (Device cannot start - Code 10).

What I have already tried:

1) Tried a bunch of different Wi-Fi routers and access points;

2) Attempted to restore + reset the system to factory settings;

3) Deleted adapters + tried different Broadcom and Intel drivers;

4) Command Prompt Commands;

5) Reinstalled ‘clean’ Windows 8.1 / Windows 10;

6) Tried different BIOS versions

… but the problem still persist.

Now my configuration is BIOS 1.20, Windows 10, Broadcom 5.93.102.19, Broadcom Serial Bus Driver over UART Bus Enumerator 12.0.1.722.

Is this a hardware or software issue? Any suggestions?

I would appreciate any help.

**Moved from: Windows / Windows 10 / Network & internet**