Windows 10: ACPI BIOS ERROR

I keep getting this error over and over again I don’t know what to do

:)

 

ACPI BIOS ERROR

Hi Tiffany,

We need to gather more information for us to better assist you on your ACPI BIOS error concern. Please provide the answers to the following questions below:

• When did the ACPI BIOS error start?
• Were there any changes made on your computer before encountering the issue?
• What are the things that you're seeing when you boot up the computer?
• Can your computer still load the Windows Recovery environment page? Windows Recovery environment is a page where you can choose to troubleshoot the computer, continue to Windows 10, or shutdown the computer.

We highly recommend posting a screenshot of the issue here for us to further investigate your concern.

 

ACPI BIOS ERROR

Found this on the Bug Check page of the error:

"If you are not performing debugging, this error indicates that you have to obtain a new BIOS. Contact your vendor or visit the internet to get a new BIOS.

If you cannot obtain an updated BIOS, or the latest BIOS is still not ACPI compliant, you can turn off ACPI mode during text-mode setup. To turn off ACPI mode, press the F7 key when you are prompted to install storage drivers. The system does not notify you that the F7 key was pressed, but it silently disables ACPI and enables you to continue your installation."

Have no idea if the F7 bit does anything (as I am not sure it works in a normal end-user situation) as I have never had cause to try but might be worth a go....similarly, trying a new BIOS

https://learn.microsoft.com/en-us/windows-hardware/drivers/debugger/bug-check-0xa5--acpi-bios-error

 

ACPI Bios Error

A friend of mine built his first computer and iv been called in to figure out what in the world this problem hes having is. Iv tried quite a lot already, ill list those out in a second. He never got past trying to install windows 10 due to the ACPI BIOS
ERROR.

System spec:

AMD Ryzen 5 2600x CPU

ASUS Prime B450M-A Mother Board

Strix GTX1050ti GPU

Ballistix DDR4 2600 RAM

a 2Tb Western Digital HDD

Behavior on boot attempt: The computer starts up fine, gets to the ASUS logo screen and then BSODs with the ACPI BIOS ERROR.

I have tried:

updating the BIOS

clearing the CMOS

tried installing Win7 same Error

Installing Win10 on the HDD outside the system.

Using Rufus to make a bootable USB from the ISO files

CSM, Secure boot, Fast boot, all OFF/ON in every variation

SATA switch to RAID from AHCI

IV tested all the hardware plus gotten Linux to run fine.

After all that the only change is that now it tries to boot into the automatic repair after the first 2 BSODs but the moment it tries to load its just BSODs with the same ACPI BIOS ERROR.

Not gonna lie im pretty stumped on this one, best guess is its a windows 10 problem somewhere. Judging from google i'm not expecting an easy one click solution but any help would be appreciated.