Windows 10: Actualización 1803

Hola

Desde ayer a las 16:07 hrs (CST). Mi computadora portátil se está actualizando a la SO: 1803 de Windows 10, y no me deja hacer nada en absoluto. Son las 12:44 hrs (Hora Centro México / CST). Quiero saber si esto es normal o como puedo proceder?


Muchas gracias y quedó a la espera de su ayuda.

:)

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".

 

Unable to update Windows 10 Pro version 1709 to 1803

Have made several attempts to update Windows 10 version 1709 to the latest version 1803 and have not been successful.

I've done the following per some suggestions found online:

• Updated drivers
• Ran the Trouble Shooter for Windows 10 (Errors found were shown to be "Fixed" per the tool)
• Unplugged the printer

Although not at every attempt, I have received the following errors:

• 0xc1900101
• 0x80070643

Can someone please advise me as to what the errors are and provide me with the steps to update Windows.

Thank you.

 

update 1803

Hi mian muddassir inayat,

There are certain laptop models and computer components that are not fully compatible with the latest Windows version (Windows 1803). Our developers are aware of this and may release an update to address the issue as soon as possible. With that said, we do
not suggest to force upgrade a device that has compatibility issues. Please answer the following so we can check for options on how we can help you with your concern:

1. What is the make and model of your PC?
2. How did you upgrade your computer to Windows 1803?
3. Did you get any error messages?
4. Do you have a 3rd party antivirus installed on your PC?

Normally, if your PC meets the requirements for the upgrade, it will be offered to you. If your PC doesn't have an incompatible hardware, then we can proceed with troubleshooting steps.