Windows 10: Adding a Flash Drive

I inserted a flash drive in and the device manager seed it but I can't find it anywhere. How do I get it working?

:)

 

CD to flash drive

Hi Pam,

There are several ways to copy your pictures from the CD to the Flash drive. One of which is by using the shortcut keys to copy and paste it.

We suggest following the steps below:

• Insert the CD and flash drive to your PC.
  
• Use Cortana and type File Explorer then click it.
• Choose This PC.
• Open the CD drive.
• If all the pictures are in a specific folder, press Ctrl + A
  on your keyboard to automatically choose all the pictures then, press Ctrl + C to copy it.
• Afterwards, Open the Flash drive, choose the location where you want to copy the pictures then press
  Ctrl + V to paste it.

Let us know if you need anything else.

 

How To Format A Write Protected Flash Memory ?

¿You already tried this one?...

Run CMD


1. diskpart
2. list disk

Then in the 3º step, put the correct number of disk in the list for the usb flash (if it's listed in disk 3, then you'll have to write select disk 3).

2. select disk #
3. clean
4. create partition primary
5. select partition 1
6. active
7. format fs=fat32
8. assign
9. exit

with that commands you will format the flash drive in fat32, if you have a large drive you can select also "format fs=ntfs" in step 7.

good luck!

 

install.wim is 7GB, how to make a bootable USB flash drive

This is a method to make a ntfs flash drive.

The trial and error step will be booting using Legacy BIOS...

Code:

This is the link:
Guide: How to Format USB Flash Drive Using Cmd - EaseUS

The link did not use active so that is why it is a trial and error step.