Windows 10: After bios flash windows won't boot fully.

Discus and support After bios flash windows won't boot fully. in Windows 10 Ask Insider to solve the problem; Hi, So ive updated my bios in order and without interruption. After the last update was done the pc booted fine and went to the windows screen (the... Discussion in 'Windows 10 Ask Insider' started by /u/Bringerofwinter, Jan 4, 2020.

  1. After bios flash windows won't boot fully.


    Hi,

    So ive updated my bios in order and without interruption. After the last update was done the pc booted fine and went to the windows screen (the windows 10 with the blue windows logo) and its been stuck in that a couple of times now for 30 mins atleast.

    Did i do something wrong? Is it normal that it takes this long or should i just be patient and wait it out?

    Im kinda freaking out because ive had a lot of issues with this pc and im at a loss. So can someone please tell me what to do? And ive researched but there is nothing on google.

    The mobo in question is the aorus 570 ultra Thanks!

    submitted by /u/Bringerofwinter
    [link] [comments]

    :)
     
    /u/Bringerofwinter, Jan 4, 2020
    #1
  2. erixx Win User

    Sabertooth 990fx won't boot to windows logo, it shuts down

    to boot and enter bios and load windows, any todays PSU (with the correct plugs) will work, AFAIK

    to enter BIOS only low wattage is used.
    Then, during boot, the HDD and a bit later the videocard card start to demand juice, then the other devices and periphericals... so the total demand during boot up is incrementing step by step, that's why a failure halfway could indicate a PSU problem....
     
    erixx, Jan 4, 2020
    #2
  3. scraff Win User
    My pc won´t boot Windows 10 from USB/DVD

    So I wanted to change from my Windows 10 x32 bits to 64x. I downloaded the Mediacreationtool and used it in both a USB and a DVD. Tried used the usb, the disk and both at the same time but they won´t boot.

    I have a P7H55-M motherboard, the BIOS is updated and configured to boot first DVD, second usb and third SATA.

    So if someone could help me it´d be great.
     
    scraff, Jan 4, 2020
    #3
  4. tops Win User

    After bios flash windows won't boot fully.

    Skype won´t wok in 17063


    Skype Won´t work... games won´t work...

    Making backup and re-format...

    Maybe I Install a Windows 7 again, At least, all of my games run smoothly ...Sadness!!

    *Banghead
     
    tops, Jan 4, 2020
    #4
Thema:

After bios flash windows won't boot fully.

Loading...
  1. After bios flash windows won't boot fully. - Similar Threads - bios flash won't

  2. After chkdsk /r windows won't boot and drive C won't show in bios

    in Windows 10 Gaming
    After chkdsk /r windows won't boot and drive C won't show in bios: Lately, I started noticing that the new NVIDIA driver won't be installed, I tried deleting it and restoring it a few times, and one time when I did that somehow the audio driver got damaged I have no idea how - I started hearing differently from the usual. While installing...
  3. After chkdsk /r windows won't boot and drive C won't show in bios

    in Windows 10 Software and Apps
    After chkdsk /r windows won't boot and drive C won't show in bios: Lately, I started noticing that the new NVIDIA driver won't be installed, I tried deleting it and restoring it a few times, and one time when I did that somehow the audio driver got damaged I have no idea how - I started hearing differently from the usual. While installing...
  4. After chkdsk /r windows won't boot and drive C won't show in bios

    in Windows 10 BSOD Crashes and Debugging
    After chkdsk /r windows won't boot and drive C won't show in bios: Lately, I started noticing that the new NVIDIA driver won't be installed, I tried deleting it and restoring it a few times, and one time when I did that somehow the audio driver got damaged I have no idea how - I started hearing differently from the usual. While installing...
  5. PC won't boot up after BIOS save & Reset

    in Windows 10 BSOD Crashes and Debugging
    PC won't boot up after BIOS save & Reset: I accidentally placed my computer on spilled water without knowing it. later when I turned on my computer there were error messages, and it immediately opened the BIOS screen before I could read it.I panicked and tried exiting BIOS and restarted my computer several times, but...
  6. Flash BIOS

    in Windows 10 Drivers and Hardware
    Flash BIOS: Asus z390 Plus Gaming with WI FI. I am not going to do a second upgrade but am tempted because I think there are about 20 updates since my desktop was updated about 2 years ago. There are 2 means to do so; one is with the downloaded cap file within the machine and an...
  7. Windows won't boot anymore - locked into BIOS

    in Windows 10 Ask Insider
    Windows won't boot anymore - locked into BIOS: Hello everyone, I received my new computer yesterday, it is a build whithout any operating system on it. I created a bootable USB stick using the official Microsoft Tool on another computer and I installed Windows 10 on my SSD. Everything worked fine, but I couldn't see my...
  8. a fully flash drive

    in Windows 10 Drivers and Hardware
    a fully flash drive: I have a flash drive that is full of videos from my game camera. How do i delete them? I downloaded them before but didn't have it set to delete them then. I have a new HP laptop with Windows 10...
  9. Windows deactivated after flashing the Bios

    in Windows 10 Updates and Activation
    Windows deactivated after flashing the Bios: Hello, I flash my bios Reason: Bios crashed with a flash programmer. Then my windows deactivated. But whenever I tried to re-activate, it's showing an error. I don't have any license key. I'm using a digital license. [ATTACH][ATTACH][ATTACH]...
  10. BIOS Flash

    in Microsoft Windows 10 Store
    BIOS Flash: The laptop asked about flashing the BIOS as a necessary update. After the update the system looks different missing files on Desktop and icons on task bar and it tells me I am on a temporary account. How do I log in to the right account so I can access files and utilities...