Windows 10: After installing June 2021 updates on 1809, patches roll back and don't complete installation

Discus and support After installing June 2021 updates on 1809, patches roll back and don't complete installation in Windows 10 Installation and Upgrade to solve the problem; We are still running workstations with version 1809 OS Build 17763.1935 Before you ask, we won't be going to 1909 until the end of year.Because of the... Discussion in 'Windows 10 Installation and Upgrade' started by Cathy Squires, Jun 24, 2021.

  1. After installing June 2021 updates on 1809, patches roll back and don't complete installation


    We are still running workstations with version 1809 OS Build 17763.1935 Before you ask, we won't be going to 1909 until the end of year.Because of the way our domain works, we have to load patches by hand and not use the automated update procerss.After loading the latest SSU KB5003711 I loaded KB5003646 without any obvious errors and then rebooted. It gets to about 15% and then says "We couldn't complete the updates" and "getting ready to retry" and appears to retry this a couple of times and then reboots and rolls back everything in the KB leaving the system at the 1776

    :)
     
    Cathy Squires, Jun 24, 2021
    #1

  2. Patch KB4505903 won't install, PC just hangs and rolls back.

    I've upgraded a friend's PC from Win 7 to Win 10. The initial upgrade was a clean install to Win 10 (build 16xx) as this was the ISO I had. Window Update started doing it's thing, upgrading to build 1803 or 1809 I think, then more patches, then it tried
    to upgrade to build 1903. This is when problems started.

    I had the PC hangs overnight for a number of times. Restarting and it would recover but rollback to build 180x. After trying lots of suggestions I want to a new ISO download from the MS site and did a clean install... success!

    Since then it has updated with July's Malicious Tool, the Windows Defender definition updates, 5 driver updates, and then...

    • July 9, 2019—KB4507453 (OS Build 18362.239)
    • July 9, 2019-KB4506991 Cumulative Update for .NET Framework 3.5 and 4.8 for Windows 10 Version 1903
    • Security Update for Adobe Flash Player: June 11, 2019
    All successfully, however...

    • July 26, 2019—KB4505903 (OS Build 18362.267)

    Fails to install at all. The PC hangs overnight on a blank screen. I power down and restart, the patch rolls back and Windows Update shows 'Failed to install on 06/08/2019 - 0x800f0845'.

    I've tried DISM and SFC /scannow a number of times. I've done the full clean boot process and tried the patch again. I've also tried resetting Windows updates using the automatic script at http://www.yourwindowsguide.com/2015/12/windows... All
    with the same result, it hangs then rolls back.

    There is no additional hardware attached to the PC. The only apps installed are Google Chrome and Office 2019.

    I can access the CBS log files but they don't make much sense to me... I'm not seeing anything like 'error' in the log.

    Any suggestions greatly appreciated please.
     
    Scuba Craig, Jun 24, 2021
    #2
  3. niko084 Win User
    Insurgency wont install and run for me....

    I have played and have fully updated CS and Half life 2....
    I am using the newest client and installed the SDK.

    I am completely blown away, if i click the desktop icon it starts the sdk and then closes, and it doesn't show up in my game list...

    First mod attempt install here, followed the directions step by step on the mods website...

    Any ideas?
     
    niko084, Jun 24, 2021
    #3
  4. 3Colors Win User

    After installing June 2021 updates on 1809, patches roll back and don't complete installation

    Windows Updated(16299.309).KB4088776 Restart is required to complete.

    Hi dalchina. Good news, I followed your suggestion and reinstalled the update and now it appears as "installed correctly" *Biggrin Maybe it was not necessary to run the Windows Update Troubleshooter or maybe if necessary. But using it I do not think it could have worsened something. The installation was very fast, unlike the first time it showed step 1 and step 2 completed.

    Thanks for the suggestions and for the time to respond After installing June 2021 updates on 1809, patches roll back and don't complete installation :) Best regards.


    And thanks for the tip of that program, I'll have it on my list.
     
    3Colors, Jun 24, 2021
    #4
Thema:

After installing June 2021 updates on 1809, patches roll back and don't complete installation

Loading...
  1. After installing June 2021 updates on 1809, patches roll back and don't complete installation - Similar Threads - installing June 2021

  2. Cumulative updates June 2021

    in Windows 10 Installation and Upgrade
    Cumulative updates June 2021: This is a summary of the cumulative updates released on June 8th for all the supported consumer releases of Windows 10. Windows 10 version 2004, version 20H2 and version 21H1 KB5003637 -, Build 19041.1052, 19042.1052 and 19043.1052. For information about Windows update...
  3. "No Audio Output Device is installed" after failed and rolled-back Windows Update

    in Windows 10 Drivers and Hardware
    "No Audio Output Device is installed" after failed and rolled-back Windows Update: After a failed Windows Update that resulted in my system bluescreening during boot several times, I currently have no audio output, and the system isnt detecting any audio devices. I have attempted the following so far, none of which has helped: Ran the audio...
  4. Patch KB4505903 won't install, PC just hangs and rolls back.

    in Windows 10 Installation and Upgrade
    Patch KB4505903 won't install, PC just hangs and rolls back.: I've upgraded a friend's PC from Win 7 to Win 10. The initial upgrade was a clean install to Win 10 (build 16xx) as this was the ISO I had. Window Update started doing it's thing, upgrading to build 1803 or 1809 I think, then more patches, then it tried to upgrade to build...
  5. why not more patches for installed 1809 versions

    in Windows 10 Installation and Upgrade
    why not more patches for installed 1809 versions: I am running the release version of 1809 as of october 3rd, updated once to version 17763.55. Was not bothered with the "missing files" bug. So i am happily using it. However... Since there are several other bugs reported on the internet and as it seems that Microsoft...
  6. why no more patches for installed 1809 versions

    in Windows 10 Installation and Upgrade
    why no more patches for installed 1809 versions: I am running the release version of 1809 as of october 3rd, updated once to version 17763.55. Was not bothered with the "missing files" bug. So i am happily using it. However... Since there are several other bugs reported on the internet and as it seems that Microsoft...
  7. Roll back 1809

    in Windows 10 Installation and Upgrade
    Roll back 1809: My MSI WS60 with Win10Pro originally, now is dual boot with Win7Ult as primary OS, on separate partition. I updated Win10Pro to 1809 on Sept18, I do believe. I have a Macrium Clone of the entire drive prior to backup. Can I boot Win10Pro, and quickly roll back the update,...
  8. Windows 10 Feature update 1809 install not completed

    in Windows 10 Installation and Upgrade
    Windows 10 Feature update 1809 install not completed: I downloaded and installed Feature update 1809. However for some reason it did not trigger a Restart. In 'Update History' it says 'Feature update to Windows 10, version 1809 Requires a restart to finish installing'. I have tried a manual restart but the update...
  9. How to update after rolling back

    in Windows 10 Updates and Activation
    How to update after rolling back: So I rolled back the 393 build to the 372 build. Windows is smart enough to not re-update me to 393 when Windows check for updates. There should be a check box or something to allow the update. So now I want to go to 393 again but WU is not seeing it. How do I force it ?...
  10. BSOD after lates Windows 10 updates install; rolls back after fail

    in Windows 10 BSOD Crashes and Debugging
    BSOD after lates Windows 10 updates install; rolls back after fail: Hi, I have updated drivers, done mem check & disk check but still get system thread exception BSOD. JOE-PC-Sat_02_03_2018_211741_69.zip 103693