Windows 10: After upgrading PCIE SSD windows 10 Freezing

I am using lenovo yoga 520 laptop, I Upgraded with NVME SSD which is Adata Xpg SX6000 Lite, after Installing Windows 10 Home in SSD facing Random windows Freezing Issue, it occurs for 20-30 seconds thereafter works normally up to next Freezing.

All Drivers are up to date, Windows booted in UFFI mode, Intel RST drivers Are up to date,

My processor is Intel 8th gen core i3 ,4Gb ram.

I followed too many solutions suggested by others but the issue is same . Windows is up to date no additional software excluding crome and VLC player and preloaded Office 365.


BIOS Mode is RST

:)

 

(Very) slow boot - Windows 10 on a PCIe Toshiba SSD - Xiaomi Notebook Air

Hi Andi,

The challenge that you are experiencing can occur due to several reasons, such as, incorrect configuration of the BIOS. To better assist you with your concern, kindly answer the following questions below:

• What are the troubleshooting steps that you have tried so far?
• Were you able to configure the BIOS of your motherboard in order for the
  PCIe (Peripheral Component Interconnect Express) SSD to work properly as a primary booting device? Kindly provide us the steps you took in configuring your
  PCIe SSD.

Also, kindly provide us the specs of your Xiaomi Notebook.

We look forward to your response.

 

clean install on PCIE SSD

after upgrading to Windows 10 from 8.1Pro, I decided to go to a PCIe ssd. Can I do a clean install on the new drive without losing my activation?

 

SSD stops and freezes laptop

Couple of updates:

1. I created a Linux boot USB key, and monitored my SSD under Linux, so this is evidently not a Windows issue, and
2. I loaded new firmware for the SSD, and my system seems to be functioning normally now. What a pleasure using a PC that doesn't consistently freeze up.

Thanks to all y'all for your suggestions!

Regards,

Dave