Windows 10: Any way to return to installer after going to Repair mode in Windows 10 ISO ?

Discus and support Any way to return to installer after going to Repair mode in Windows 10 ISO ? in Windows 10 Ask Insider to solve the problem; Hello there ! I'm on VirtualBox, trying to accomplish something but I don't know if it would be possible. Last week, my brother came with a new... Discussion in 'Windows 10 Ask Insider' started by /u/Adrien2002, Jul 17, 2020.

  1. Any way to return to installer after going to Repair mode in Windows 10 ISO ?


    Hello there !

    I'm on VirtualBox, trying to accomplish something but I don't know if it would be possible. Last week, my brother came with a new laptop, a laptop with one SSD and one HDD. When I installed Windows, The backup partition went on the HDD and the rest on the SSD which is not something I wanted. I wanted to leave entirely free the HDD so I had an idea.

    I know that, when using diskpart, you can DISABLE a disk and I think that, if I do, the installer would only see one disk but the problem is that as soon as you entered the Repair mode, you can only leave it by turning off the computer which returns to default disk detection one booting on the ISO again.

    Is there a way to return to the installer WITHOUT to have to turn off the computer ? Maybe a command in the CMD that might open the installer again ? There must be one ! it has to.

    Before anyone suggest me to unplug one disk. This new laptop has a 3-years warranty, I don't really want to break it. I think you can understand that. Also, no such option in the BIOS either.

    I'm not even sure that disabling the disk in diskpart would do the trick, honestly, since I can't check it out but this is the only way I found to eventually "protect" the other disks from Windows' madness.

    submitted by /u/Adrien2002
    [link] [comments]

    :)
     
    /u/Adrien2002, Jul 17, 2020
    #1
  2. Kursah Win User

    Repair Windows 7/8/10

    Repairing Windows 8

    Further improving on previously deployed OS repair methods, Windows 8, 8.1, Server 2012 and 2012 R2 further allowed advanced repair where an in-place upgrade or total re-install would be required on previous operating systems. In all honesty, before Windows 10 implementation, this was arguably the easiest OS to repair for a couple of years by running more basic commands.

    This has since been advanced to more closely match Windows 10/Server 2016 repairs but with the below information I hope to guide you through performing these advanced tasks more easily!

    Spoiler: Windows 8/8.1 Repair DISM

    If CHKDSK and SFC fail to repair the issues with the system, then it this is your next option and besides restoring from a previous backup might be the second-to-last option before re-installing the operating system. We will utilize DISMfor this next repair option.
    • In some instances, you won't need the OS ISO to perform the DISM image cleanup. You can attempt this on any OS from 8-10 by using the following command in elevated CLI: DISM /Online /Cleanup-Image /RestoreHealth
    • In many cases now due to some changes Microsoft made, you'll need to have a copy of the OS ISO available. The ISO will need to be a standard deployment variety that contains Install.WIM in the Sources directory, otherwise the process will fail. Once you have the correct ISO, mount it in Explorer (can do this natively on Microsoft Windows 8.0+), verify the drive letter, verify Image.WIM in the Sources directory.
      • To download a Windows 8.1 ISO from Microsoft, click here.
    • Enter the following in elevated CLI: DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:X:\Sources\Install.wim:1 /LimitAccess
      • X = drive letter of mounted ISO. Change to match the appropriate drive letter.
      • Say I had the Install.WIM located in C:\Images, I would type the following command: DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:C:\Images\Install.WIM:1 /LimitAccess
    The DISM scan can take a while, often times longer than an CHKDSK or SFC scan. To speed up the process, have the Image.WIM on a faster flash media or on local storage rather than disc media. This will help greatly. In many cases one or two runs of this command will repair most issues I've found with Windows 8/8.1.

    Once the DISM repair process has been found successful, or not, I will perform a reboot. If the repair was unsuccessful, this will be when I attempt a second pass. If the second pass fails, it is time to move onto the next solution.

    However, if the DISM repair passes at any point, reboot the system and then perform an SFC to confirm no further issues are found or need resolved. This step is likely overkill for those not seeking to do optional steps.

    Operating System Refresh

    It should be noted that in the event DISM fails to repair the system, then an OS refresh would be the next suggestion if the deployed that could save the user's files and OS deployment.

    This feature has been an available feature since Windows 8 launched in 2012. The biggest benefit with this option over Windows 7's in-place-upgrade is not necessarily requiring the OS installation media to perform the repair.

    If the system is an OEM, an OS refresh from the OEM partition may mean a reinstall of the OS and loss of user data but the restoration of OEM software and bloatware. But you can still choose a manual OS-only refresh without the bloatware if you take the correct steps.

    The best choice in my opinion is to run an OS refresh procedure from the advanced boot menu or you can run the installation media while in Windows to perform and Upgrade installation, this will keep your files and settings but replace Windows files and components.

    To access the advanced boot menu for Windows 8, there are a several options.
    • When choosing restart from the OS GUI, hold down SHIFT and click restart. This method will work even if you cannot log into a profile on the system which makes it very useful in some situations.
    • If logged in, access PC Settings, and click Restart Now under Advanced Startup.
    • If logged in, open a command prompt window and type shutdown /r /o /t 0 which will initiate a reboot into the advanced menu right with no delay. Without /t 0, there will be a 60-second delay. The number value after the /t is delay seconds.
    Once you've reached the advanced boot menu, choose Troubleshoot. From there you can choose to Refresh your PC, Reset your PC and Advanced Options. For this repair, we want to choose Refresh your PC. It's description reads "If your PC isn't running well, you can refresh it without losing our files." That is exactly what we want to accomplish here!

    Follow the prompts and processes, and after the refresh installation and rebooting, you should be greeted with a login screen back to your profile in your stable OS environment. At this point you should be able to use the system as intended, if in doubt then re-run the SFC and DISM scans.

    In-Place Upgrade

    If CHKDSK, SFC and DISM fail to repair the issues with the system, yet you can still boot to the Windows desktop, then the next option is to perform an in-place upgrade. This is more in-depth than an Operating System Refresh. It re-installs most of the operating system's core image and critical files without losing your profiles, data or programs, but do expect to lose some settings. In many cases this process can fix some major issues and refresh an otherwise corrupt and issue-ridden OS installation back to something stable and usable.

    Time to close the CLI windows and get back into the GUI, unless you want to deploy Windows through CLI. You'll have to source a different guide for that process!

    Requirements to perform an in-place upgrade:
    • Must have installation media that matches the installed OS version and type. This applies to both Windows and Windows Server.
    • Must be able to get to the desktop on the affected system to correctly initiate this process, booting to the media will not allow an upgrade to be performed.
    That last rule is the frustrating part of this repair process if you cannot get that far, backup what you can and do a fresh installation. Otherwise proceed.
    • Start the process by using autorun or manually running setup.exe from the installation media.
    • Windows 8/Server 2012+ can mount ISO's in Windows Explorer, you can use that instead of physical media options to perform this task.
    • You'll come to the installation window, the options will be Upgrade or Custom. Choose Upgrade. This is critical as choosing custom will force you to overwrite, append or wipe out the current install rather than performing any kind of repair.
    • Follow the on-screen prompts, which should be very few for you to interact with. The overall process looks and is the Windows install GUI. Once it is completed, the system will automatically reboot (may need to more than once).
    • After the reboot(s) after the in-place upgrade you should have a fully functional Windows without issues or corruptions.
    Performing an in-place upgrade makes sense, and gives you a stable and clean running operating system when there's an issue or corruption you just can't fix but things aren't broken enough to warrant a fresh installation. The point of this process is to refresh the Windows OS files but retain your data, programs, and settings. That is precisely what the in-place upgrade procedure accomplishes.

    I should also add that this process can be accomplished remotely as well, from start to finish. I have done so with persistent LogMeIn, ScreenConnect and Teamviewer installations on various remote systems I have performed this task on, RDP should work as well. Being able to do this level of repair remotely is a huge benefit to any sysadmins out there looking to keep a client happy and perform that "remote magic" IT guys are known for.


    **If at this point your issues are not fixed, then there is something else occurring that is causing the issue be it Malware, hardware, drivers, etc. Please refer to the OP in this thread to run through some of those tests and diagnostics, or create a new thread seeking help and stating what you've tried.**
     
    Kursah, Jul 19, 2020
    #2
  3. Cannot install any apps from windows store

    I can't think of anything else.

    lx07 already suggested a Repair install, that's all I can think of

    Read through the tutorial and ask any questions
    Repair Install Windows 10 with an In-place Upgrade - Windows 10 Forums

    I suggest
    Step 4 : To do a repair install of Windows 10 with an ISO file
    -- OR --
    Step 5 : To do a repair install of Windows 10 with USB installation media

    Another member might suggest something else - you can read while you wait *Wink

    Bill
     
    Slartybart, Jul 19, 2020
    #3
  4. Any way to return to installer after going to Repair mode in Windows 10 ISO ?

    Windows 10 USB boot

    Hi there, am not a windows 10 expert. I have a pc in the bedroom on windows 10, I messed up the bootloader trying to fix the xp on that system.

    System wont boot, trying to repair via win 10 usb installer.

    Downloaded the media creation tool to install windows 10 installer on usb stick. Not compatible with a host of usb sticks I have. Tried the usb sticks that others use, but I think they use rufus; as the media creation tool by win 10 does not detect the usb stick.

    So quick question, the win10 machine i am trying to repair the bootloader is a win7 upgraded to win10.
    If i were to use the usb win10 installer to "repair installation" does the version of the iso downloaded via the media creation tool matter?

    There is three options:
    Windows 10
    Windows 10 Home
    Windows 10 N

    Also is there a step by step instead of using rufus as I want to try an alternative method of creating a usb win 10 installer. Preferably with more compatibility.

    System is a asus sabertooth 990 (r2?) with AMD phenom X 6.

    Also is there any other software I can load onto the usb that can repair the bootloader easily?
    That would be the ideal alternative. Thanks
     
    TRUELOVE95, Jul 19, 2020
    #4
Thema:

Any way to return to installer after going to Repair mode in Windows 10 ISO ?

Loading...
  1. Any way to return to installer after going to Repair mode in Windows 10 ISO ? - Similar Threads - return installer going

  2. Is there a way to download the Windows 10 ISO?

    in Windows 10 Customization
    Is there a way to download the Windows 10 ISO?: I'm asking this because the Media Creation tool tells me that I "need" 8GB on the C drive just to install Windows 10 on a flash drive which has 16GB. And I can only open 6.77GB. So here's the question: is there any way to directly download the ISO? I say it again, NOT the...
  3. Repairing Windows 10 with ISO file..

    in Windows 10 Installation and Upgrade
    Repairing Windows 10 with ISO file..: Evening I have Windows 10 Pro version 1909 and am trying to repair the installation as for example the system tray icons won't work Backup won't work etc etc I understand the latest ISO/Media Creation Tool is for version 2004 ; is that correct and if so how do I get a 1909...
  4. Is there any way to repair Explorer.exe or restore it?

    in Windows 10 Ask Insider
    Is there any way to repair Explorer.exe or restore it?: I think my explorer.exe is really messed up. It keeps crashing even if I manually end it and restart it using task manager. I can still use apps as long as I start the app before explorer crashes. (By crash I mean i get a black screen shortly after I login to my desktop with...
  5. Returning to win 10 after repair

    in Windows 10 Installation and Upgrade
    Returning to win 10 after repair: Have a 2 year old Dell XPS laptop that I sent in for repair. It needed a new screen and motherboard repair. The original machine had 8.1 and I immediately upgraded to win 10. Dell returned machine with 8.1 and to me to activate 10. That is not working so I started a download...
  6. Windows (10) Defender corrupted and will not run. Any way to repair it?

    in AntiVirus, Firewalls and System Security
    Windows (10) Defender corrupted and will not run. Any way to repair it?: Windows 10 Home (Dutch). I went back to a previous version of Windows 10 while keeping my installed software. Before that I removed Avast software. Also used an Avast software removal tool (so it should be really gone, and indeed I don't see any traces). But somehow...
  7. Windows repair iso

    in Windows 10 BSOD Crashes and Debugging
    Windows repair iso: can I download on my computer and burn to cd for my other computer that is missing the boot manager and will not open windows? https://answers.microsoft.com/en-us/windows/forum/windows_10-performance/windows-repair-iso/094723b8-328d-4e54-a3f4-b52b7cb6dd25
  8. Is there any way to install Windows 10 Upgrade from Safe Mode?

    in Windows 10 Installation and Upgrade
    Is there any way to install Windows 10 Upgrade from Safe Mode?: Further to my thread: Windows 10 ISO Upgrade from 7 Pro Failure: Blank Screen Is there any way to install Windows 10 Upgrade from Safe Mode? 13269
  9. Any way to return to my enterprise version without any change?

    in Windows 10 Installation and Upgrade
    Any way to return to my enterprise version without any change?: HI about one month ago, i updated my windows 10 enterprise. but then i saw it is upgrading to 10 pro, which i absolutely didnt want. but after upgrade my windows is so messed up: my bluetooth is gone, i cant make any program as default, my new laptop's speed is very low,...
  10. Repair Install with burned ISO

    in Windows 10 Installation and Upgrade
    Repair Install with burned ISO: Its a friend's machine that might benefit from a repair install. I have a cd with the techbench iso download burned via Imageburn software. I installed Win10 v2 with this cd successfully. The friend used the media center download routine to update to Win 10 2nd version...