Windows 10: Attempted to update the latest version and screen froze forever and this happen. Please help

submitted by /u/teeling1396
[link] [comments]

:)

 

Unable to update Window 10 Pro version 1607 to version 1709

Have made several attempts to update Windows 10 version 1607 to the latest version 1709 and have not been successful.

I've done the following per some suggestions found online:

• Updated drivers
• Ran the Trouble Shooter for Windows 10 (Errors found were shown to be "Fixed" per the tool)
• Unplugged the printer
• Ran the DISM.exe

Although not at every attempt, I have received the following errors:

• 0xc1900101 - 0x30018
• 0x900704c7

Can someone please advise me as to what the errors are and provide me with the steps to update Windows.

Thank you

 

Unable to update Windows 10 Pro version 1709 to 1803

Have made several attempts to update Windows 10 version 1709 to the latest version 1803 and have not been successful.

I've done the following per some suggestions found online:

• Updated drivers
• Ran the Trouble Shooter for Windows 10 (Errors found were shown to be "Fixed" per the tool)
• Unplugged the printer

Although not at every attempt, I have received the following errors:

• 0xc1900101
• 0x80070643

Can someone please advise me as to what the errors are and provide me with the steps to update Windows.

Thank you.

 

froze screen

Hi,

Windows 10 may have encountered a system conflict that caused this issue. Since you can't access anything after it got stuck to 75%, we suggest that you perform a startup repair. Kindly follow the steps below on how to perform this troubleshooting step:

• Boot to Advanced Startup Options from a hard reboot. Press and hold the power button on your PC until it powers off and until it powers on.
• Repeat steps 1 and 2 above until you see the Windows logo screen or Please wait
  during boot. Usually it may take repeating up to 3 times.
• Select See advanced repair options.
• Under Advanced Startup Options, select
  Troubleshoot.
• Select Advanced options. Under Advanced options, select
  Startup Repair.
• If prompted, select an administrator account to provide credentials for approval, type in the password and click
  Continue.
• Startup Repair will now start Diagnosing your PC, and attempt to automatically repair it.

Please allow a couple of minutes or hours to diagnose your PC by the startup repair.

Kindly get back to us with the results.