Windows 10: Automatic Repair after Booting to Other SSD?

Have Windows 10 running on SATA SSD. No problems but decide to upgrade to NVMe PCI SSD for even faster loading speed.

1. Unplug original SSD,

2. Install new NVMe SSD then Windows from USB Media Disc Current Image. Install goes fast, no problems.

3. Plug in old SATA SSD

4. Boot to old SSD, copy files to 3rd empty SSD.

5. Reboot, select new NVMe SSD as boot disk and bang:


Automatic Repair, Windows Cannot Repair.


What am I doing wrong to cause this? Is there a problem with the new drive?

:)

 

Windows 10 random automatic repair after changing boot priority.

Hello. So i have an Windows 10 Pro. Sometimes when i am changing in bios boot order from USB to HDD ( SDD ) windows starts booting with AUTOMATIC REPAIR and then restarting. Is this something with BIOS \ Windows 10 bug related? Tested on pc and on laptop , and sometimes it doing the same.


Situation on PC first,listen:

Few days ago after i change boot in UEFI BIOS from USB to SSD.
Then Windows 10 showed at 1 boot Automatic Repair.
When starting Windows 10 boot loader starts by "preparing automatic repair" and diagnosing pc.
Interesting is that if I restart Windows (after procedure mentioned earlier) it will boot normally. This startup problem was occured only when starting system again after shutdown or restarted pc from windows.So i was needed 2 boots to boot properly to windows.
But on pc, format was needed to remove completely issue and after format is fine.

Pc :
2x8gb Kingston Hyperx 1600mhz DDR3
SSD samsung Evo 250 gb
4790k stock
Asus Sabertooth Z97 Mark 2 with UEFI BIOS


Now laptop with old standard bios:
On laptop i made the same operation, change boot from USB to HDD and on first boot Windows 10 shows Automatic Repair. But it happened once and i cant reproduce. No format was needed.

laptop is very old with 2gb ram

Why on pc format was needed when on laptop not?



Thanks for suggestions.

 

laptop doesnt boot automatically

This is what happened.

1. Did a repair install and later disabled hibertnate in CMD.
2. Enabled legacy option ROM in BIOS.
3. After a few times startup ( i used the system in such mode for 5 days), changed boot option back to default.
4. Vola!! It boots automatically to win10 without any keypress. Tested it with many starts to confirm the same.
5. Re-enabled hibernate option using CMD and later selected Fast Startup.
6. System booted normally, without the need for any keypress.

I do not know exactly whether such steps resolved the problem or what else happened, hence cannot suggest above steps.

Many thanks to all members who helped to troubleshoot problems.

 

Windows10 Automatic Repair

Hi,

This issue might have occurred due to corrupted system files that are not letting the operating system to perform repair and boot to the desktop.

We would like to know some information:

• Have you tried booting in
  Safe Mode? If not, we suggest that you try it. Check this article for information.
• What troubleshooting steps have you done so far? We need to know it for us to know what other troubleshooting steps to give.

You can check the troubleshooting steps provided by Deepika Gowda on this

link.

We will wait for your response.