Windows 10: Automatic Repair Blue Screen

So, recently the blue screen error (Automatics Repair) has shown up. I've looked at many YouTube videos and searched up for similar problems on this website, but nothing currently works.


- Shutting down just loads me back to the blue automatic repair screen when the power button was pressed


ADVANCED OPTIONS


- Continue (Exit and continue to Windows 10) just loads into the automatic repair screen

- Turn off your PC just loads me back into the blue automatic repair screen when the power button was pressed

- Using a device, clicking all options loads me back into the automatic repair screen (USB Floppy/CD, USB Hard Drive, Fake Legacy Option, Realtek Family Controller, and another Realtek Family Controller.


TROUBLESHOOT


- Reset this PC (Keep my files) loads for a little then says, "There was a problem resetting your PC. No changes were made.". Leading me to press cancel.



-RECOVERY MANAGER (In troubleshoot)


- !Help (System Recovery, backing up files first, auto selection), loads slowly up to 100%, but when at 100% it would still appear as if files were loading, not allowing me to click next.

- Maintenance (Run Computer Checkup), typing is required in all options and I did not try them, but I tried the command prompt in the troubleshoot folder.

- Precautions (File Backup, auto selection), would load up to 100% but like the System recovery, it would be at 100% with the next button not activated, forcing me to cancel once again.

- Support, here I am! :/


When I rebooted and tried the other option, shutting down, its would go back to the automatic repair screen.


-ADVANCED OPTIONS (In troubleshoot)


- System Restore, I do not have a "restore point", so it won't work.

- Startup Repair, would go to the black loading screen, which eventually loads to a blue Startup Repair screen, notifying me that it couldn't repair my PC.- Go back to the previous version, says that they ran into a problem and won't be able to take me back to the previous version of Windows, telling me to reset my PC.

- Command Prompt, tried a whole bunch of commands from youtube, and on this website. Did everything with turning it off after and nothing happened. The blue screen appears.

- System Image Recovery, It says that Windows cannot find a system image on this computer. Don't know what to do with that.

- UEFI Firmware Settings, tells me to restart. When Restart was clicked, it would just load into a blue startup menu in front of a black screen. I have no clue which F's to press, so I just press enter to continue the startup. This brings me back to the blue automatic repair screen.

- Startup Settings, when I pressed Restart, it would just load into a set of F functions, but I press enter; back into the automatic repair screen.


What do you think I should do?

Why is this happening?

Should I just press restart and have everything deleted?


Help!

:)

 

How to get past blue Automatic Repair screen and into my PC?

Hi Ed,

Let us try resolving your concern with the blue Automatic Repair screen issue. We suggest that you check and follow the troubleshooting steps in this
article.

We would appreciate it if you could get back to us and provide us your feedback.

 

automatic repair Error

Hi,

In order for us to provide the next steps needed to resolve the automatic repair error, we would like to gather more information:

• Can you send us a screenshot of the blue screen error that you're getting?
• What changes did you make on your computer prior to this issue?

Regards.

 

Blue screen and stop code

Hi
Jeferis,

There are a lot of factors for this matter to occur. To isolate the issue, we have some questions for you:

• 
  What activity have you done to
  trigger the NTFS and FAT FILE SYS loop?
  
• 
  were there any error messages?
  
• 
  What troubleshooting steps have you done so far?
  

It is possible that the
Boot
Sequence were corrupted by the previous activity which
triggered the Blue Screen Error and the loop. We recommend that you perform these
suggested troubleshooting
and see if there are any changes:

Startup Repair.


To access the
Startup Repair Screen, turn off the
PC 3-4 times(force shutdown),
while on the Blue screen Error. This will route you to the
Startup repair screen:

Advanced Boot Options > click Troubleshoot > Advanced options > Command Prompt

and run the following command:

Run SFC Scan:  

SFC
will
scan
and
run
an
automatic repair
to any
corrupted system files
that it will detect. We suggest that you perform it twice. To run an
SFC scan, follow these steps:  

• 
  Run
  Command Prompt as Administrator.  
  
• 
  Type
  sfc /scannow
  and hit
  Enter.   
  

Boot Record:

This will fix the corruptions on
boot records or boot
sequence. To run this command, follow these steps:

• 
  Run
  Command Prompt as Administrator.
  
• 
  Type the following command:  
  
  • 
    Bootrec /fixMBR  
    
  • 
    Bootrec /fixBoot
    
  • 
    Bootrec /rebuildBCD
    

Update us on how it goes.

Regards.