Windows 10: Automatic repair issues

Hello,

For whatever reason after a Windows system update my laptop cannot get past the blue "Your PC Did Not Start Correctly check SrtTrail.txt" screen. When i try to repair with out a bootable Win-10 USB drive I get "you need to sign in as an administrator to continue, but there aren't any administrator accounts on this PC" on all the advanced repair option tabs.

After booting from a USB I am able to use l the advanced repair options however none seem to fix the problems. For example System restore will list restore points, but will not allow me to use them stating "You must enable system protection on this drive"

This is the SrtTrail file:

Startup Repair diagnosis and repair log
---------------------------
Number of repair attempts: 1

Session details
---------------------------
System Disk =
Windows directory = D:\WINDOWS
AutoChk Run = 0
Number of root causes = 1

Test Performed:
---------------------------
Name: Check for updates
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms

Test Performed:
---------------------------
Name: System disk test
Result: Completed successfully. Error code = 0x0
Time taken = 94 ms

Root cause found:
---------------------------
A hard disk could not be found. If a hard disk is installed, it is not responding.
That root cause line is odd to me because in the same log folder there is this disklayout.txt


Microsoft DiskPart version 10.0.18362.1

Copyright (C) Microsoft Corporation.

Disk ### Status Size Free Dyn Gpt
-------- ------------- ------- ------- --- ---
Disk 0 Online 931 GB 1024 KB *
Disk 1 Online 931 GB 0 B *
Disk 2 Online 29 GB 0 B *

Disk 0 is now the selected disk.

HGST HTS721010A9E630
Disk ID: {4DFCDD6E-DB8C-4BF7-BB1F-868A1BB60BB4}
Type : SATA
Status : Online
Path : 2
Target : 0
LUN ID : 0
Location Path : PCIROOT(0)#PCI(1700)#ATA(C02T00L00)
Current Read-only State : No
Read-only : No
Boot Disk : No
Pagefile Disk : No
Hibernation File Disk : No
Crashdump Disk : No
Clustered Disk : No

Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- --------- --------
Volume 0 C TITANIC NTFS Partition 931 GB Healthy
Volume 1 RAW Partition 15 MB Healthy Hidden

Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- --------- --------
Volume 0 C TITANIC NTFS Partition 931 GB Healthy
Volume 1 RAW Partition 15 MB Healthy Hidden
Volume 2 Recovery NTFS Partition 529 MB Healthy
Volume 3 D NTFS Partition 930 GB Healthy
Volume 4 FAT32 Partition 99 MB Healthy Hidden
Volume 5 E CCCOMA_X64F FAT32 Removable 29 GB Healthy

Volume 1 is the selected volume.

Disk ### Status Size Free Dyn Gpt
-------- ------------- ------- ------- --- ---
* Disk 0 Online 931 GB 1024 KB *

Offline : No

Disk 1 is now the selected disk.

Samsung SSD 850 EVO 1TB
Disk ID: {4CE9A4DF-AC78-4415-848A-E367F1B0AB15}
Type : SATA
Status : Online
Path : 3
Target : 0
LUN ID : 0
Location Path : PCIROOT(0)#PCI(1700)#ATA(C03T00L00)
Current Read-only State : No
Read-only : No
Boot Disk : No
Pagefile Disk : No
Hibernation File Disk : No
Crashdump Disk : No
Clustered Disk : No

Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- --------- --------
Volume 2 Recovery NTFS Partition 529 MB Healthy
Volume 3 D NTFS Partition 930 GB Healthy
Volume 4 FAT32 Partition 99 MB Healthy Hidden

Partition ### Type Size Offset
------------- ---------------- ------- -------
Partition 1 Recovery 529 MB 1024 KB
Partition 2 System 99 MB 530 MB
Partition 3 Reserved 16 MB 629 MB
Partition 4 Primary 930 GB 645 MB

Partition 4 is now the selected partition.

Partition 4
Type : ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
Hidden : No
Required: No
Attrib : 0000000000000000
Offset in Bytes: 676331520

Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- --------- --------
* Volume 3 D NTFS Partition 930 GB Healthy
Any help would be appreciated

:)

 

Surface Book Automatic Repair Issue

Hi Andrew,

Thank you for posting your query on Microsoft Community.

We sincerely regret for the inconvenience caused.

Provide us the following details in order to assist you better.

• How did you perform the Automatic repair? Did you use a DVD to perform it or via desktop?

If you perform via desktop then I suggest you to boot your device using installation media.

I suggest you to perform the startup repair using the Windows 10 installation media from the below link and check if it helps.

Windows 10 herunterladen

Boot from the Windows 10 installation media and then perform automatic repair and check if it helps.

Follow the steps to perform Automatic repair:

• Insert installation media and restart the computer.
• Select language and click on Next.
• Select Repair your Computer and click on Skip this drive.
• Select Troubleshoot and click on Advanced Options.

Here choose the option Automatic Repair and follow the prompted instructions.

Please let us know if you need further assistance.

Thank you

 

Windows10 Automatic Repair

Hi,

This issue might have occurred due to corrupted system files that are not letting the operating system to perform repair and boot to the desktop.

We would like to know some information:

• Have you tried booting in
  Safe Mode? If not, we suggest that you try it. Check this article for information.
• What troubleshooting steps have you done so far? We need to know it for us to know what other troubleshooting steps to give.

You can check the troubleshooting steps provided by Deepika Gowda on this

link.

We will wait for your response.

 

Automatic Repair Loop

Hi Charlene,

Your concern regarding the device going into an Automatic Repair Loop can be caused by change on its settings/configuration or broken system files. To effectively assist you with your concern, can confirm if you've made any changes on your device prior to
your concern?

As an initial step to get back into the normal Windows screen, we suggest that you perform a
Startup repair. The repair will attempt to fix any broken components/files which may prevent your device from booting properly. To do this, follow the steps below:

• On theAutomatic Repair screen, select Advanced options.
• Select Troubleshoot.
• Select Advanced options.
• Select Startup Repair.

We'll appreciate if you can send us an update.