Windows 10: Automatic Repair

I wonder why Automatic Repair doesn't start when my PC cannot start, please refer to my previous question; to repair Startup I have to go manually through Recovery to Repair Startup Option. Could anyone explain why this is so. I have read many threads mentioning Automatic Repair.

:)

 

Automatic Repair Loop

Hi Charlene,

Your concern regarding the device going into an Automatic Repair Loop can be caused by change on its settings/configuration or broken system files. To effectively assist you with your concern, can confirm if you've made any changes on your device prior to
your concern?

As an initial step to get back into the normal Windows screen, we suggest that you perform a
Startup repair. The repair will attempt to fix any broken components/files which may prevent your device from booting properly. To do this, follow the steps below:

• On theAutomatic Repair screen, select Advanced options.
• Select Troubleshoot.
• Select Advanced options.
• Select Startup Repair.

We'll appreciate if you can send us an update.

 

Windows10 Automatic Repair

Hi,

This issue might have occurred due to corrupted system files that are not letting the operating system to perform repair and boot to the desktop.

We would like to know some information:

• Have you tried booting in
  Safe Mode? If not, we suggest that you try it. Check this article for information.
• What troubleshooting steps have you done so far? We need to know it for us to know what other troubleshooting steps to give.

You can check the troubleshooting steps provided by Deepika Gowda on this

link.

We will wait for your response.

 

laptop doesnt boot automatically

This is what happened.

1. Did a repair install and later disabled hibertnate in CMD.
2. Enabled legacy option ROM in BIOS.
3. After a few times startup ( i used the system in such mode for 5 days), changed boot option back to default.
4. Vola!! It boots automatically to win10 without any keypress. Tested it with many starts to confirm the same.
5. Re-enabled hibernate option using CMD and later selected Fast Startup.
6. System booted normally, without the need for any keypress.

I do not know exactly whether such steps resolved the problem or what else happened, hence cannot suggest above steps.

Many thanks to all members who helped to troubleshoot problems.